Google
  Web www.gpspassion.com
fiogf49gjkf0d


GpsPasSion Partners



Versions

Links/Liens




Portal/Portail
Rechercher

- -

Polls/Sondages
Sondage
Pour vous guider sur la Route :
GPS Mobile (SEM)
GPS Intégré
Smartphone
Autre
Voter  -  Résultat des votes
Votes : 2805




Club GpsPasSion
Soutenez le site!

USA: (US$)
EUROPE: (€)
Guide Paypal


GpsPasSion Forums
Home | Profile | Register/Enregist. | Active Topics | Search/Recherche | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 English Forums - General
 * Partner Forums *
 [Semsons] Spectec SDIO GPS with Micro SD slot
 New Topic  Reply/Répondre
 Printer Friendly
Previous Page
Author  Topic Next Topic
Page: of 3

CARlitos1255

10 Posts

Posted - 19 déc. 2007 :  16:21:55  Show Profile  Reply with Quote
Of course, I paid for sending back the device for diagnosis and eventual replacement.
Shipping & mail address can be found in Spectec website (http://www.spectec.com.tw/) .
I suggest that prior to sending the device you find someone to tell about the situation and agree to test your device.

Go to Top of Page

CARlitos1255

10 Posts

Posted - 19 déc. 2007 :  16:25:40  Show Profile  Reply with Quote
Of course, I paid the shipment of my device back for diagnosis.
You can find shipping & e-mail coordinates is Spected web site (http://www.spectec.com.tw/).
I suggest that you find someone - a real person -to tell the case and agree of the procedure to follow.

Go to Top of Page

emiliolv

Spain
3 Posts

Posted - 20 déc. 2007 :  11:04:58  Show Profile  Reply with Quote
quote:
Originally posted by CARlitos1255

Of course, I paid the shipment of my device back for diagnosis.
You can find shipping & e-mail coordinates is Spected web site (http://www.spectec.com.tw/).
I suggest that you find someone - a real person -to tell the case and agree of the procedure to follow.





A real person? What do you mean?
Go to Top of Page

CARlitos1255

10 Posts

Posted - 20 déc. 2007 :  11:14:15  Show Profile  Reply with Quote

I found out that in sometimes behind the name 'xxxxx' there might be different persons replying like in a call center. So what I did is to have a phone call to make sure I got someone really involved in my problem and not giving std responses.
Go to Top of Page

cuto72

Chile
3 Posts

Posted - 04 janv. 2008 :  15:33:22  Show Profile  Reply with Quote
Hello,

I found the problem for Tungsten T3:

1.- First, spectec 810 does not work when we installed the wifi sd card from PalmOne.

2.- The instructions on the espectec Web are wrong, you have to do the following step:


step 1. If you have instaled sdio wifi card from palmOne, your first step is a hard reset, and then create your new acount on palmOne desktop manager

step 2. Install with palmOne Quick Install the palm driver SdioDriver.prc
OS 5.0: http://WWW.SPECTEC.COM.TW/download/gps-palm-os5/SdioDriver.prc

step 3. Install Install with palmOne Quick Install the SDIOUART_Release.prc
OS 5.0: http://WWW.SPECTEC.COM.TW/download/gps-palm-os5/SDIOUART_Release.prc

when the hotsync is finished the palm request a soft reset.

step 4. Click preferences icon.

step 5. Select the option "connection". A screen for the connection appears

step 6. Tap New in this window.

step 7. Type SD in the Name field.

step 8. Set connect to as Modem and via as ARSDIOSerial

step 9. Select Details to set the baudrate.

step 10. Set the speed as 9600bps and then press ok.

step 11. without any card on your Pam, open SDUART APP. and press ok on the error message, and press ok when apear UNABLE TO OPEN SERIAL PORT., press menu/option/settings and then make sure of this:

Port SDIOCommDirect
Baud Rate 38400
Data bits 8
Parity None
Stop Bits 1
Trigger 32
Mode Byte
FlowCntrl None
(dont mark LoopBack)

and then press Save/OK on error message/ok on Open Serial Port error, and exit, after that meke a sotf resert.

step 12. Put the Spectec 810 whith microSD with programs and your maps if tSDUART dialog apear EXIT!!! and press OK on any error windows.

step 13. Open the GPS application like PathAway or cotoGPS (I use this software).

step 14. Press the menu button.

step 15. From the menu click Configure GPS and then:

Protocol NMEA
Port ARSDIOSerial
Baud 38400
Not mark Auto Detect and Then press CONNECT.

IF YOU DONT HAVE CONECTION MAKE A SOFT RESET AND THEN OPEN YOUR GPS SOFTWARE, THATS IS WORKING NOW ON MY TUNGSTEN T3.

(SPECTEC 810 NOT WORK WITH PALM TX, AND WAS IMPOSIBLE TO ME MAKE WORK WITH TREO 650)
(SPECTEC 812 NOT WORK WITH PALM T3, BUT WORK EXCELLENT WITH TREO 650 AND PALM TX)

Good luck and best Regards

Cuto72
Go to Top of Page

cuto72

Chile
3 Posts

Posted - 04 janv. 2008 :  17:21:32  Show Profile  Reply with Quote
Sorry, I forgot to mention that to use the spectec 812 with treo 650 you need CSSdrv http://www.conklinsystems.com/palm/sdrv.php , without this will not work.

Regards
Go to Top of Page

Philjay50

United Kingdom
1 Posts

Posted - 17 janv. 2008 :  15:59:30  Show Profile  Reply with Quote
Hi, I managed to get the SDG 810 to work on my iPaq 1950 using TT Navigator, although it did for some reason dump most of the information off at some point. I reloaded and again it worked fine until the other day when it stopped finding the GPS signal. I have tried everything without success to get it working again. I have been exchanging Mail with Henry at Spectec but again we are just dancing around the problem. I now believe that the GPS unit has failed, is there anyway of getting it tested, I cannot go back to my supplier as I bought it while traveling.
I have even asked Spectec if they will test it but as yet no answer.
Go to Top of Page

modeltom

USA
3 Posts

Posted - 25 juin 2009 :  02:52:45  Show Profile  Reply with Quote
quote:
Originally posted by cuto72


step 11. without any card on your Pam, open SDUART APP. and press ok on the error message, and press ok when apear UNABLE TO OPEN SERIAL PORT., press menu/option/settings and then make sure of this:

Port SDIOCommDirect
Baud Rate 38400
Data bits 8
Parity None
Stop Bits 1
Trigger 32
Mode Byte
FlowCntrl None
(dont mark LoopBack)

and then press Save/OK on error message/ok on Open Serial Port error, and exit, after that meke a sotf resert.

step 12. Put the Spectec 810 whith microSD with programs and your maps if tSDUART dialog apear EXIT!!! and press OK on any error windows.

step 13. Open the GPS application like PathAway or cotoGPS (I use this software).

step 14. Press the menu button.

step 15. From the menu click Configure GPS and then:

Protocol NMEA
Port ARSDIOSerial
Baud 38400
Not mark Auto Detect and Then press CONNECT.




What SDUART App is that? I only have the UART and driver software, I didn't get any diagnostic software.

Can you post a link, or the website, or the proper name of the App?


thx, Tom.
Go to Top of Page

bizzybody

USA
49 Posts

Posted - 27 juin 2009 :  07:37:43  Show Profile  Reply with Quote
Has anyone tried the SDG 810 in a LifeDrive?
Go to Top of Page
Page: of 3  Topic Next Topic  
Previous Page
 New Topic  Reply/Répondre
 Printer Friendly
Jump To:
GpsPasSion Forums © 2002-2017_GpsPasSion/Manzanite Go To Top Of Page
This page was generated in 6,2 seconds. Powered By: Snitz Forums 2000 Version 3.4.05