| Versions |
  |
|
| Author |
 Topic  |
|
kgm
98 Posts |
 Posted - 29 avr. 2012 : 20:05:07
|
| It is based on WinCe 6.0. Most AIOs based on CE 6.0 will die after you install MioPocket. But probably you can get helped, if you inbetween did not change anything at SD-card and you can establish an ActiveSync connection betwenn your AIO and desktop PC: Carefully read MioPocket's Readme, where it is explained how to do. |
 |
|
|
conte
Italy
27 Posts |
Posted - 09 mai 2012 : 13:47:12
|
quote:
Originally posted by JohannL
Hi Guys. Im new here, and also not too advanced as you all with this software, BUT now i have a huge problem. I feel like crying....hope anybody can help? I have (as per instructions on this site) loaded MioPocket onto my SD card, switched on my Car DVD unit (an EBAY Chinese thing), opened the NAVI menu (it always had the options - NAVI, MEDIA, INTERNET, SETTINGS - i have selected settings and searched on the SD card for the MioPocket exe option. Selected it, it started installing, then it required a reboot of the device. The device rebooted - AND NOW all it does is showing the GPS Satelite picture with a loading bar (just like it always did, but it only showed that for 2 seconds), and it does nothing. I cannot do anything - PLEASE - I WILL PAY SOMEONE TO HELP ME - AS I SAID I AM IN TEARS!!!!! How do i revert back to the original state? Please select the link to see the device i am using - http://global.ebay.com/62-HD-DVD-Player-for-HYUNDAI-TIBURON-2002-2008-GPSTVBT/140736842896/item - PLEASE, ANYONE? Hope somebody can assist me?
You should add your issue also here:
http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=144044 |
|
|
|
cheetah64d
101 Posts |
Posted - 09 mai 2012 : 17:41:30
|
quote:
Originally posted by kgm
Most AIOs based on CE 6.0 will die after you install MioPocket.
Don't think it's true. Osprey did include some code-lines for hive-based devices, which is - to my understand - the biggest problem with WinCe6 based device.
I've one, and MP installed on it flawless. |
X-GPS Navigation Device, Model GPS-S450B. |
|
|
|
kgm
98 Posts |
Posted - 09 mai 2012 : 18:49:24
|
quote:
Originally posted by cheetah64d
Don't think it's true. Osprey did include some code-lines for hive-based devices, which is - to my understand - the biggest problem with WinCe6 based device.
Quite reverse: hive-based devices luckily allow to persistently unlock a GPS! Of course if it is prudently done. But MioPocket does not take care which device is to be unlocked, it does not know anything of all the today's CE6 units since at least 2 years in the market. MioPocket is mainly fixed on devices of Mitac brands, for which it originally was created for. MioPocket is not really CE6 aware. Note that even CE6 based Mios got bricked installing MioPocket. Read the relevant forums (gpspassion, austech, 4pna, ...) and I'm sure you will revise your oppinion. |
|
|
|
Danko.ba.nanko
27 Posts |
Posted - 12 mai 2012 : 18:02:23
|
Do not want to scare you but it sounds like brick. If you did not buy the GPS long ago you should contact the seller and tell him there is a problem with software of the GPS (imagine the reason), there are files which they (if in connection to the producer of the GPS) can have and probably send you.
They are consisted of group of files needed to reflash your GPS. It is a matter of getting the files on SD card and putting it into GPS (taking that unit still recognizes the SD card).
Other option searching on net for reflashing files which is HARD/IMPOSSIBLE
BR
quote:
Originally posted by JohannL
Hi Guys. Im new here, and also not too advanced as you all with this software, BUT now i have a huge problem. I feel like crying....hope anybody can help? I have (as per instructions on this site) loaded MioPocket onto my SD card, switched on my Car DVD unit (an EBAY Chinese thing), opened the NAVI menu (it always had the options - NAVI, MEDIA, INTERNET, SETTINGS - i have selected settings and searched on the SD card for the MioPocket exe option. Selected it, it started installing, then it required a reboot of the device. The device rebooted - AND NOW all it does is showing the GPS Satelite picture with a loading bar (just like it always did, but it only showed that for 2 seconds), and it does nothing. I cannot do anything - PLEASE - I WILL PAY SOMEONE TO HELP ME - AS I SAID I AM IN TEARS!!!!! How do i revert back to the original state? Please select the link to see the device i am using - http://global.ebay.com/62-HD-DVD-Player-for-HYUNDAI-TIBURON-2002-2008-GPSTVBT/140736842896/item - PLEASE, ANYONE? Hope somebody can assist me?
|
|
|
|
teniente2008
4 Posts |
Posted - 13 mai 2012 : 19:40:59
|
Hello to everybody.
I have a big problem.
I've just purchases a chinese gps:
http://www.ebay.es/itm/7-Bluetooth-GPS-4GB-Newest-Map-Wireless-Reverse-Camera-/220800623446?pt=UK_AudioTVElectronics_GPSSystems_GPSSystems&hash=item3368be2356
but with WindowsCE 6.0
I installed MIOPOCKET with copying Media and MioAutoRun folders and MioAutoRun.exe, MioAutoRun.mscr and MortScript.exe in the SD card
I think the installation wasn't right because after that the bluetooth doesn't work. The GPS signal doesn't work, every time I try to turn on, it gives me the following message:
OPEN SERIALS PORT
ERROR
Before the Miopocket installation, I was able to get into windowsCE tapping an icon in the desktop, now I'm not able to do that
I didn't do any backup of the system, I thought it wasn't necessary if I didn't make an installation in the flash
any suggestion?
P.S. I'd try to find in this topic, but there aren't any tools to search inside and there are 181 pages |
Edited by - teniente2008 on 13 mai 2012 19:43:24 |
|
|
|
kgm
98 Posts |
Posted - 14 mai 2012 : 11:16:04
|
Operating System: Microsoft Windows CE 5.0
1. If you can access MioPocket, uninstall MioPocket.
2. Try to hard-reset device (means reset it to factory defaults). Note this will fail if unit's registry is hive-based.
BTW: It always makes sense to read all pages here, sincee mostly the answer already is given - multiple times the same issue posted here, as you did too. |
Edited by - kgm on 14 mai 2012 11:25:26 |
|
|
|
teniente2008
4 Posts |
Posted - 15 mai 2012 : 14:00:09
|
Thanks KGM for your answer, I tried what you said but without success.
I always use the search tool in all the forums I visit but here there isn't any search tool. It would be helpful. With all my respect but reading 181 pages is very hard and much more difficul to someone who doesn't have the english as a mother tongue  |
Edited by - teniente2008 on 15 mai 2012 14:02:09 |
|
|
|
kgm
98 Posts |
|
|
teniente2008
4 Posts |
Posted - 15 mai 2012 : 18:42:51
|
The link I wrote is the right one, but the GPS I got has 6.0. I unistalled MP, I can make a connection by Activesynk (but I think it's too late because something in the Operating System has changed or has been erased and I didn't make any backup
|
Edited by - teniente2008 on 15 mai 2012 18:49:25 |
|
|
|
kgm
98 Posts |
Posted - 15 mai 2012 : 19:38:58
|
Remember my words:
a) has nothing changed on the SD-card used, and
b) can establish an ActiveSync-connection
then you simply restore your device's registry in section HKLM\init. The data you need were stored by MioPocket during installation on SD-card. This all is explained in MioPocket's ReadMe file!
But if you think it's too late ...
|
Edited by - kgm on 15 mai 2012 19:42:27 |
|
|
|
teniente2008
4 Posts |
Posted - 15 mai 2012 : 21:39:29
|
It's too late, kgm. It's too late because after I uninstalled miopocket, I formatted the SD card and copied the files that came with the GPS, so I don't have the backup. It's my fault.
Thank you very much kgm for your interest
I'm not the kind of person who likes to go fast, but I've gone too much fast this time  |
|
|
|
vgb14
2 Posts |
Posted - 16 mai 2012 : 16:41:41
|
| Hi, I just installed miopocket 4.0 R68 on my navigon 2100. Everything seems to work fine except I have no GPS reception signal now. I'm hoping that there's some configuration file I can update to specify the com port and baud rate, which I believe is 1/4800. I searched but couldn't find any info. The only thing close that I found was a gps.ini file in the TroNik directory. I updated that but it didn't have any effect. I'm hoping someone can help. Thank you. |
|
|
|
kgm
98 Posts |
Posted - 16 mai 2012 : 16:58:37
|
@vgb14
Simply uninstall MioPocket or try to find an answer already given in this thread: I'm sure issue like your's multiple times posted here. |
|
|
|
vgb14
2 Posts |
Posted - 16 mai 2012 : 17:09:40
|
| Actually, I searched exhaustively and I couldn't find a solution that worked for my case - this problem may be related specifically to my navigon 2100. I see others have got it to work with miopocket 2.0, which I may try, but i thought I'd ask in case someone has been successful getting the gps signal to work with the miopocket 4.0 and navigon 2100 combo. |
|
|
|
Topic |
|
|
|
| This page was generated in 0,86 seconds. |
 |
|
- 
- 
MioPocket 4.0 (Unlock for GPS devices)
