| Versions |
  |
|
| Author |
 Topic  |
|
John Dough
Andorra
390 Posts |
 Posted - 11 juin 2012 : 16:26:38
|
quote:
Originally posted by John Dough
quote:
Originally posted by costas
diMkaWA_P153 (320x240, 480x234, 480x272, 800x480 
diMkaWA_P153_pt_ls (wvga(480_800, 800_480), wqvga(240_400, 400_240), vga(480_640, 640_480), qvga(240_320, 320_240))
Dimka TomSoft 
Do you test your TMC device ?
Plug the original cable from the battery supply ( which containing TMC antenna ) and Try that program :
If you manually entered an FM frequency and received station name (by RDS), as you see above.
In primo, if you manually entered an FM frequency do you receive station name (by RDS) ?
I will test it with Dimkas skin and report back.
Yes it works fine now with new skin. cheers. |
Mio V505TV CE 6 16gb microsd card MIO 580 CE 5 MP4 R68 16gb sdhccard /MIO C710 4gb sd card MP4 R68 Igo83tts Miomap V3.3tts |
 |
|
|
jwoegerbauer
1821 Posts |
Posted - 11 juin 2012 : 18:44:48
|
Another nifty tool you should know of: MixSerTester
Allows testing TMC COM-ports. |
|
|
|
alois
7 Posts |
Posted - 12 juin 2012 : 18:27:43
|
| Nice find, thx. |
|
|
|
costas
45 Posts |
Posted - 13 juin 2012 : 11:46:49
|
John Dough, does autoscan work ?
And it stop when find TMC station ?
|
|
|
|
jacko5
19 Posts |
Posted - 21 févr. 2013 : 13:02:56
|
Hi can some one send me an email with the link to get TMC working on my Mio 500 spirit with aftermarket software.
jackoatuk@yahoo.co.uk
Thanks. |
|
|
|
shadow0188
1 Posts |
Posted - 20 avr. 2013 : 23:06:10
|
Hello to all,
I have a moov s555 and i have strong software problem for the device.
I have upgrade my device bat only s505 firmware have i found. Now can i my pmd recover not to run, while its not showing the device. The s505 Recovery prog working fine, but now i haven't BT and i think no TMC too.
If you can me an windows ce img and cks file make or can all files from the windows dir copying and sending to me that helped me.
Thank you and sorry for my bad english.
|
|
|
|
m_maier
3 Posts |
Posted - 09 mai 2013 : 09:32:00
|
Hello,
I achivied to activate TMC on my S505. I tested it with that FMx-Receiver tool, tuning to a certain frequency shows me the correct sender station name and also that a TMC signal is beeing received.
So from hardware perspective everything should be working properly.
But running IGO Primo 2.4 I see the traffic sign in main menu and when I click on it I come to the TMC page but there is only 0.00 MHz shown.
Tried it with COM1 and 38400 Baud as often posted in the boards. What's wrong? I have a lot of differnt tmc.dlls in my IGO root folder.
Thanks in advance,
Michael |
|
|
|
m_maier
3 Posts |
Posted - 11 mai 2013 : 19:20:06
|
Hi folks,
I'm trying to get TMC working on my Mio Spirit 500. I'm stuck trying around different things but without success at the moment. I wanna tell all the fellows out there what I achived and what's the problem at the moment.
Unlock
I tried different unlock methods (dalanik, slide, bluefish, ...) but now am staying at dalaniks. I'm using the trigger by sd-card method because I modifed the auto.mscr to set the registry key for the TMC and doing a soft reset after this. After the soft reset all those mio stock apps are killed and the installation of the unlock is done.
Navigation
I use different navigation software and those are working properly from sd-card, so far: Everything fine!
TMC
TMC is working because when I start that FMx-Receiver app you find in different boards (TMC.exe or GNS TMC.exe) it shows me on COM1 the availability and receiption of a TMC signal on differnet radio frequences (it shows "TMC available").
MN7.7.5
With port 1 and different baud rates in block <TMC> in usersettings.xml I only get a red TMC symbol next to the GPS symbol. Manually tuning to a frequency where a tmc signal should be received does not work. I also tried MixSerDrv to pass the signal from COM1 to a virtual COM7 port and have set mn to listen to this port (and set drvprefix to COM as recommended) but without success.
IGO Primo 2.4
I also tried to get TMC working with primo but also without success. Tried all available gpstmc.dll versions but always shows 0.0 MHZ in the traffic overview page.
Conclusion
After a lot of days of googeling and trying around I have a good pna but without working tmc. |
|
|
|
m_maier
3 Posts |
Posted - 14 mai 2013 : 20:46:52
|
quote:
Originally posted by m_maier
IGO Primo 2.4
I also tried to get TMC working with primo but also without success. Tried all available gpstmc.dll versions but always shows 0.0 MHZ in the traffic overview page.
Played around a little with sys.txt, profiles and different gpstmc.dlls and now the TMC-page shows me "87.5 MHz" instead of "00.0 MHz", but no tmc messages at all and no autoscanning.
|
|
|
|
Topic |
|
|
|
| This page was generated in 0,72 seconds. |
 |
|
- 
- 
Detect Built in TMC receiver MioMoovSpirit
