| Author |
 Topic  |
|
costas
45 Posts |
 Posted - 18 avr. 2012 : 22:14:07
|
My unlock is 99,99 % TMC Ready.
It has in start script line :
RegWriteDword("HKLM","Drivers\BuiltIn\SW_TMC","Protocol",1)
We don't have TMC service, but my Mio S 605 understand RDS from FM radio.
|
 |
|
|
Kevinjansen
Netherlands
6 Posts |
Posted - 19 avr. 2012 : 13:41:04
|
| Thanks for everyone’s help I made a new topic to further discuss my problem! |
|
|
|
kunter
United Kingdom
3 Posts |
Posted - 18 mai 2012 : 14:09:40
|
Hi All!
I have finaly runned TMC builtin receiver working with Igo primo 1.2 on my Mio Navman Sirit s505. Now I try to run it with Igo Primo 2.0 and ahve a problem. Igo is still searching on 87.7 MHz alternately with 0.0 MHz
sys.txt
[tmc]
source="GNSPORT"
port="COM,1"
baud=14400
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_GNSPORT"
saved_config_port="1"
saved_config_portname="COM"
#saved_last_frequency=100.1
tuner_alg_search_force_on=1
tuner_alg_searchtimeout=10000
tuneralg_rds_packet_timeout=6000
tuneralg_8a_packet_timeout=6000
tuneralg_3a_packet_timeout=20000
tuneralg_last_8a_packet_timeout=10000
show_all_provider_list="1"
auto_band_search_up="1"
auto_tuning="1"
Any ideas what to do?
Ok, it works after intallation of Dimka skin but does not recive tmc information unless I'll put frequency manually. I have to work on it a bit more. |
Mio Navman Spirit s505 |
Edited by - kunter on 19 mai 2012 14:14:42 |
|
|
|
ellian
3 Posts |
Posted - 21 mai 2012 : 10:45:20
|
Using the registry trick i managed to have the tmc on my mio 685 with primo 2
the issue is that it is very unstable i have the tmc only if i don't move the gps for 1 minute
this is difficult when you consider driving your car
What could i do to increase the tmc receiving capability ?
Is there some settings to do in the sys.txt ?
Thanks in advance |
|
|
|
John Dough
Andorra
390 Posts |
Posted - 21 mai 2012 : 17:59:50
|
| Do you have the aerial connected and is tmc being transmitted? |
Mio V505TV CE 6 16gb microsd card MIO 580 CE 5 MP4 R68 16gb sdhccard /MIO C710 4gb sd card MP4 R68 Igo83tts Miomap V3.3tts |
Edited by - John Dough on 21 mai 2012 18:35:42 |
|
|
|
kunter
United Kingdom
3 Posts |
Posted - 22 mai 2012 : 03:14:41
|
| I Give up. Do you know how to force Igo primo to scan automaticaly? If I put frequency manually Igo recives Tmc but when I choose auto scan mode nothing happens it stuckes on the same, one frequency forever. Good news is that it can read list of stations from tmc_stations.txt but I want to auto scan to be working. Thanks in advance for every sugestion. |
Mio Navman Spirit s505 |
|
|
|
ellian
3 Posts |
Posted - 22 mai 2012 : 06:14:04
|
@john, yes my cable is plugged when I drive
Yesterday I managed to get some stations using the list mode of primo
As explained by kunter, primo in this mode is switching between the station in a predefined list
It is good if you stay in your city but it is useless when you are traveling
Does somebody managed to make the auto scan working ? |
|
|
|
John Dough
Andorra
390 Posts |
Posted - 22 mai 2012 : 15:57:34
|
quote:
Originally posted by kunter
I Give up. Do you know how to force Igo primo to scan automaticaly? If I put frequency manually Igo recives Tmc but when I choose auto scan mode nothing happens it stuckes on the same, one frequency forever. Good news is that it can read list of stations from tmc_stations.txt but I want to auto scan to be working. Thanks in advance for every sugestion.
Auto scan is a nuisance as it stops at every radio station not just TMC ones so most people use a list and set it to list view when tuning. I tried auto scan in Europe and it does not work there either. |
Mio V505TV CE 6 16gb microsd card MIO 580 CE 5 MP4 R68 16gb sdhccard /MIO C710 4gb sd card MP4 R68 Igo83tts Miomap V3.3tts |
|
|
|
costas
45 Posts |
Posted - 22 mai 2012 : 16:50:29
|
If you use Dimka skin, 2 useful lines to put in sys.txt
[tmc]
test_station_time=3 ; waiting time in seconds the signal TMS before continue the search
hold_station_time=15 ; waiting time in seconds at a frequency of the station, after the loss of signal
Also, Leinad make a list (with step of 0.1 MHz) that forced Primo to autoscan with step of 0.1 MHz .
Of course, Primo scans using a list, but as the list is the step of 0.1 MHz, primo will scan all frequencies.
Just copy that list into folder save\PROFILES\01\userlists
Al credits go to Leinad !!!
Take a look : http://www.youtube.com/watch?v=-U0SCYgxvEE&feature=youtu.be |
Edited by - costas on 22 mai 2012 19:33:49 |
|
|
|
John Dough
Andorra
390 Posts |
Posted - 22 mai 2012 : 22:39:50
|
Excellent I have it in save/userlists folder and will test later.
Ok tested with primo 2 and not detecting any TMC while with 1.2 no problems strange?? is something else needed for Primo 2?? |
Mio V505TV CE 6 16gb microsd card MIO 580 CE 5 MP4 R68 16gb sdhccard /MIO C710 4gb sd card MP4 R68 Igo83tts Miomap V3.3tts |
Edited by - John Dough on 24 mai 2012 22:01:21 |
|
|
|
John Dough
Andorra
390 Posts |
Posted - 24 mai 2012 : 21:57:57
|
quote:
Originally posted by kunter
Hi All!
I have finaly runned TMC builtin receiver working with Igo primo 1.2 on my Mio Navman Sirit s505. Now I try to run it with Igo Primo 2.0 and ahve a problem. Igo is still searching on 87.7 MHz alternately with 0.0 MHz
sys.txt
[tmc]
source="GNSPORT"
port="COM,1"
baud=14400
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_GNSPORT"
saved_config_port="1"
saved_config_portname="COM"
#saved_last_frequency=100.1
tuner_alg_search_force_on=1
tuner_alg_searchtimeout=10000
tuneralg_rds_packet_timeout=6000
tuneralg_8a_packet_timeout=6000
tuneralg_3a_packet_timeout=20000
tuneralg_last_8a_packet_timeout=10000
show_all_provider_list="1"
auto_band_search_up="1"
auto_tuning="1"
Any ideas what to do?
Ok, it works after intallation of Dimka skin but does not recive tmc information unless I'll put frequency manually. I have to work on it a bit more.
Do you have a link to dmkas skin for primo 2 ? |
Mio V505TV CE 6 16gb microsd card MIO 580 CE 5 MP4 R68 16gb sdhccard /MIO C710 4gb sd card MP4 R68 Igo83tts Miomap V3.3tts |
|
|
|
costas
45 Posts |
Posted - 24 mai 2012 : 22:46:23
|
diMkaWA_P153 (320x240, 480x234, 480x272, 800x480 
diMkaWA_P153_pt_ls (wvga(480_800, 800_480), wqvga(240_400, 400_240), vga(480_640, 640_480), qvga(240_320, 320_240))
Dimka TomSoft 
Do you test your TMC device ?
Plug the original cable from the battery supply ( which containing TMC antenna ) and Try that program :
If you manually entered an FM frequency and received station name (by RDS), as you see above.
In primo, if you manually entered an FM frequency do you receive station name (by RDS) ?
|
Edited by - costas on 24 mai 2012 23:24:17 |
|
|
|
piens
1 Posts |
Posted - 26 mai 2012 : 14:38:40
|
| With the CheckTMC prog I get stationname as in your picture. In Primo 2 I can't find a place to input a frequency manually. In iGO8 I get TMC-hardware not found. What am I missing? (In the registry I set the Protocol to 1) |
|
|
|
John Dough
Andorra
390 Posts |
Posted - 28 mai 2012 : 18:35:56
|
quote:
Originally posted by costas
diMkaWA_P153 (320x240, 480x234, 480x272, 800x480
diMkaWA_P153_pt_ls (wvga(480_800, 800_480), wqvga(240_400, 400_240), vga(480_640, 640_480), qvga(240_320, 320_240))
Dimka TomSoft
Do you test your TMC device ?
Plug the original cable from the battery supply ( which containing TMC antenna ) and Try that program :
If you manually entered an FM frequency and received station name (by RDS), as you see above.
In primo, if you manually entered an FM frequency do you receive station name (by RDS) ?
I will test it with Dimkas skin and report back. |
Mio V505TV CE 6 16gb microsd card MIO 580 CE 5 MP4 R68 16gb sdhccard /MIO C710 4gb sd card MP4 R68 Igo83tts Miomap V3.3tts |
|
|
|
steventje
1 Posts |
Posted - 11 juin 2012 : 13:24:36
|
I have also the same problem. I have a Mio Moov S505 with Igo 1.2.
TMC is working but not just very fine.
I have a list with radio stations and when I put manual mode, he finds TMC. But I want the program to scan all frequencies. The strange thing is that he's always scanning from 86.3 to 87.5 (or something like that). Inspite of scanning up. He's in a sort of loop. |
|
|
|
Topic |
|
- 
- 
Detect Built in TMC receiver MioMoovSpirit
