| Versions |
  |
|
| Author |
 Topic  |
|
|
RichCapeCod
151 Posts |
 Posted - 11 févr. 2012 : 23:07:43
|
My Garmin dashboard mount came undone and I'm in AZ at the moment and the next several months while my extra adhesive pads are on Cape Cod. :-/
Where is a good place to pick up one of these adhesive pads?
Thanks,
Rich |
|
|
Ads
|
|
|
Captcaper
USA
383 Posts |
Posted - 12 févr. 2012 : 00:54:33
|
| Most hardware or walmarts carry scotch HDuty double sided tape.Clean the base and dash good and apply. Auto Zones,etc. are good too. |
Presently owned Dezl 760LMT Montana 600 2460lmt 1490T SP2610 SP2720 GPSMAP 276C GPSMAP 60CS NorthStar 951XD in the boat since 1996.
Previous owned Garmin 48,76cs,210. Nuvi 880,1490T. |
 |
|
|
RichCapeCod
151 Posts |
Posted - 12 févr. 2012 : 02:14:11
|
Thanks Captcaper, I'll give those a try.
Rich |
|
|
|
geezer
USA
144 Posts |
Posted - 12 févr. 2012 : 15:53:13
|
quote:
Originally posted by RichCapeCod
Where is a good place to pick up one of these adhesive pads?
Thanks,
Rich
RC airplane or car hobby shops have very good double sided tape. |
Nuvi 3790, Nuvi 3490
|
Edited by - geezer on 12 févr. 2012 15:56:00 |
|
|
|
Captcaper
USA
383 Posts |
Posted - 20 févr. 2012 : 19:12:50
|
| I gave up the the double sided discs. Always worked free during the hot summer sun. I screwed it down..done. |
Presently owned Dezl 760LMT Montana 600 2460lmt 1490T SP2610 SP2720 GPSMAP 276C GPSMAP 60CS NorthStar 951XD in the boat since 1996.
Previous owned Garmin 48,76cs,210. Nuvi 880,1490T. |
|
|
|
Carbuff
USA
164 Posts |
Posted - 20 févr. 2012 : 22:28:30
|
I like the window suction cups
BUT
I wish there were Garmin mounts available that utilized two or three suction cups, as on my racecar's video-cam. 
That way, when one cup comes loose, you have time to grab the unit before it falls to the floor.... |
The Carbuff
Nuvi 1490LMT w/EcoRoute HD
Quest 2
NJ, USA |
|
|
|
bobwadd
USA
14 Posts |
Posted - 20 févr. 2012 : 23:32:11
|
You need 3M VHB Double Sided Foam Tape. Not sure on the part number you need as they have more than one type. I took the suction cup of my mount and glued the disk disk to it with Epoxy for plastic. Placed 3M VHB Tape on the disk and mounted it to the windshield. It has stayed there for almost three years now in the hot Florida sun.
By the way, VHB stands for Very High Bond. The double sided tape you find in automotive and home improvement stores will not last. |
|
|
|
Captcaper
USA
383 Posts |
Posted - 22 févr. 2012 : 21:34:17
|
VHB is used to hold on sheet metal paneling for sides of Ultility trailers,Snowmobile trailers for one..expensive per roll but strong.
In my case I have a Ram mounting system (Aluminum not plastic) that extends the 1490T out away from dash towards me and down below dash so there is a lot of weight or leverage on the adhevsive. Screws did the trip..I've never been afraid to drill holes in Boat bottoms or cars. But I know what I'm doing :) |
Presently owned Dezl 760LMT Montana 600 2460lmt 1490T SP2610 SP2720 GPSMAP 276C GPSMAP 60CS NorthStar 951XD in the boat since 1996.
Previous owned Garmin 48,76cs,210. Nuvi 880,1490T. |
|
|
| |
Topic |
|
|
|
| This page was generated in 0,42 seconds. |
 |
|
- 
- 
Need adhesive for Garmin GPS Dashboard Mount
