Hi, I am using VS2008 and I need to switch off Static Navigation in the GPS receiver but I do not know how to do this. What I do know is that the receiver has to be put in Sirf mode first.
Does somebody have example programming code in VB of C#? e.g. mySerialPort.write(...) 'Put receiver in Sirf Mode mySerialPort.Write(...) 'Switch off Static Navigation MyserialPort.Write(...) 'Put receiver back in NMEA mode
How can I check if Switch off to statis navigation was succesful?
Hi again, Finally, after many days of searching the internet and with a lot of logical thinking I figured out how to switch off static navigation. If you are interested in the solution, it is a litle more difficult that what I assumed, or if you want to know more about decoding NMEA or Sirf, just let me know at email@example.com Regards, Andre