| Versions |
  |
|
| Author |
 Topic  |
|
g_alin
USA
817 Posts |
 Posted - 15 déc. 2010 : 00:03:18
|
white_flag,
(after hardware reset) can you check (with TRE) the settings: HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH
(to see if you have the new - updated - settings)
|
 |
|
|
white_flag
22 Posts |
Posted - 16 déc. 2010 : 00:13:33
|
g_alin
those are the settings
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="994,540 384,728 380,352 1617,352 1608,732 "
"DriverName"="s3c2450_restouch.dll"
"MaxCalError"=dword:00000007(7)
one more question:
Wen I start the device with SD card inside I have all the time the blus screen for firmware update. How can I remove this?I do not have any original software from mio, just the "MioPocket Mini 4.0 Release 2"
thx |
|
|
|
g_alin
USA
817 Posts |
Posted - 16 déc. 2010 : 00:22:23
|
white_flag,
I am confused: why if I changed the registry settings in firmware behaves differently AND if you use Calibration it works ...
In the package: UPGRADE_MIO_11Jun10.zip you can find cUPGRADE_APP_.exe. Start it again and choose: SuperUser for Moov series and NormalUser to C series.
Anyway I would recommend you to left that UPGRADE Screen open (there where some cases when the flash was corrupted and the GPS was stack in the orange screen ... ) |
|
|
|
white_flag
22 Posts |
Posted - 16 déc. 2010 : 00:44:26
|
| good point, I let it like it is now (blue).back to the calibration.what else can be done?if it is WEU - western europe, makes an bigger diffrence? |
|
|
|
jk0ka
4 Posts |
Posted - 21 déc. 2010 : 00:18:37
|
| I have mio moov 200 n177. when you start the device it says cobia 300 1.00.0028 and it freezes on orange screen mio explore more. It cannot connect to pc. I do not know what was the cause, because i got it like that. I tried gnd + pin 9, i tried 12 + pin 19 before that. When i use gnd + pin 9 it does not start, just black screen, i also mio pocket and i put auto.exe and the rest in cobia_300_32 folder. i do not know how to get the upgrade screen. please help. thank you. |
|
|
|
bassemh
Kuwait
3 Posts |
Posted - 23 déc. 2010 : 00:58:39
|
| #1601;#1575;#1588;#1609;#1606;#1594;#1601; |
bassemh |
|
|
|
TeXniKK
Ukraine
7 Posts |
Posted - 24 déc. 2010 : 22:39:49
|
Greetings! I have MIO moov 330, cobia 410. After turning it on I see only black screen and nothing happens. connecting pin 9 to GND doesnt work too, so i have made jtag cable, and i can see my device in h-jtag. So I think there is a bad boot in it.
Can anybody read boot from working mio 330 and post here, please? |
|
|
|
ablbd
342 Posts |
Posted - 25 déc. 2010 : 07:14:01
|
@TeXniKK
Depends on the nand type you have inside.
I am in the same situation. Somebody gave me boot blocks but donor device had k9gag08 nand, which is NOT compatible with mine (k9lag08).
Soon I'll get dumps from other 2 devices...
PS: "Standard" h-jtag drivers will not write/erase blocks and will not generate ECC, so I made for both types special drivers which are working fine. |
Edited by - ablbd on 25 déc. 2010 07:22:59 |
|
|
|
TeXniKK
Ukraine
7 Posts |
Posted - 25 déc. 2010 : 08:59:33
|
@ablbd
Wow! I have K9GAG08UOM too. Can you give me boot blocks for this flash?
For writing memory i use SJF2443_Mio.exe. |
|
|
|
ablbd
342 Posts |
Posted - 25 déc. 2010 : 09:32:51
|
Ok, here it is http://www.megaupload.com/?d=C5BPEAUV
Avoid sjf_mio because I don't know how is writing ECC in the spare area. You'll find the modified hjtag driver+definition file, copy them in the right places and use this one. Shoud work faster (<2min for 1MB written data) and ECC is according the dumped model.
After finishes, insert any SD and reset (OFF->ON) the device, it should enter into blue screen. Let me know the result.
PS: hjtag driver was not previously tested, I don't have device with k9gag08 nand. If you encounter any problems, please report that too. |
Edited by - ablbd on 25 déc. 2010 09:39:19 |
|
|
|
espoo
1 Posts |
Posted - 25 déc. 2010 : 13:40:55
|
Dear people, I also deleted WIN CE OS 4.2 Core on my Mio C510 trying to upgrade it from it's bios, can't install it's driver to upgrade it from DVD that I downloaded and the only solution is to upgrade it from SD card. My actual version is UTool S2x0_F R30 512MB, I copy winceimg.bin and winceimg.cks on SD card (in root, ofcourse, nothing else is on the card) and try WINCE by SD/MMC option and nothing happens, my C510 freezes and the blue screen stays until I turn it off "hard".
All I want is to get it's win ce working again. Or any other version of it, just I want it back. Also tell me is it the right way to upgrade it (only these two winceimg files in root) or there's something more? I read something about unlocking this bin file, maybe I should unlock and copy these files to root. Which unlocking tool to use then?
I would really appreciate your help, until that I'm afraid my C510 is unusable:(
Thank you |
|
|
|
jk0ka
4 Posts |
Posted - 26 déc. 2010 : 02:15:38
|
| I also tried to make jtag interface but can not connect to pc. please some help. mio moov 200 orange screen |
|
|
|
kener
Netherlands
69 Posts |
Posted - 26 déc. 2010 : 13:50:47
|
jk0ka:
did you try:
Connect usb to moov and pc
Then switch to Reset and then to ON
Now (normal) a working connection will be the result.
If not then try with empty battery the same.
Good luck |
Mio Moov 330 ce5.0 MP-R68
Mio Moov 370 ce5.0 Blue unlock shell
Mio C510e ce4.2 MP-R22 |
|
|
|
jk0ka
4 Posts |
Posted - 26 déc. 2010 : 14:35:46
|
| Yes. i also tried pin 12 + 19 then pin 9 + gnd. tried loading blue screen using sd card. tried connecting with jtag that i found schematic for 320. and no success |
|
|
|
TeXniKK
Ukraine
7 Posts |
Posted - 26 déc. 2010 : 17:11:44
|
@ablbd
Well, I tryed this method, but without success.. After i added driver to h-flasher and scanned my device, it said that i have wrong flash id. Then i disabled flash id checking and successfully flashed my device with file, you gave me, but than i have black screen too.
after that i flashed full image "Moov330 SmartST (Cobia_410_64 v5.50.0208) SMFlash_0_26214400.img", but have same result too.. |
|
|
|
Topic |
|
|
|
| This page was generated in 1,36 seconds. |
 |
|
- 
- 
How to upgrade/downgrade the firm. on Mio (Moov+C)
