| Versions |
  |
|
| Author |
 Topic  |
|
|
- Lynx -
3 Posts |
 Posted - 12 oct. 2008 : 20:58:36
|
Hello . . .
New to the forums & the GPS fun.
I picked up a Qstarz BT-Q1000P & downloaded the latest software.
After playing around with it I am very impressed with how works (logging in general, as well as, with Streets and Trips).
One thing I cannot figure out is the following:
After logging, I load the track(s) using the Travel Recorder software & notice that the "Track Name" will be correct. That is, it will include the date and appropriate local time. However, within the very same track, the "Start Time" shows as one hour earlier. And of course, all the logged point and end time are all one hour off.
I have looked at every setting imaginable to correct this, but nada!
Any help would be appreciated.
- Lynx - |
|
|
Ads
|
|
|
- Lynx -
3 Posts |
Posted - 14 oct. 2008 : 06:20:27
|
I figured it out . . .
I am in the Central Time Zone & have my laptop's system time set accourdingly. Within the Qstarz Travel Recorder software, I had the "Display Time Zone" set to the same. Seemed logical to me, but set that way causes the issue I described. If I set the "Display Time Zone" as Eastern Time Zone, The Start & End times match after downloading logged data.
Not sure if that is the way it's supposed to work, but it does!
Lynx |
 |
|
|
- Lynx -
3 Posts |
Posted - 11 déc. 2008 : 00:52:06
|
Travel Recorder 4.3 is out.
That has fixed the problem.
Lynx |
|
|
| |
Topic |
|
|
|
| This page was generated in 0,36 seconds. |
 |
|
- 
- 
Qstarz Travel Recorder 4.2 (Time Mismatch)
