| T O P I C R E V I E W |
| PsiDOC |
Posted - 10 avr. 2006 : 23:18:16
Another 1st from PsiDOC... The Packard Bell 400 goes off road using OziExplorer! 
Have been trialing this for a day or so using home made maps and it's pretty accurate.
For our test today we decided that the best place to test a GPS software for off road use was... Off Road!
In the woods at the bottom of a muddy bank, serious tree cover and still no problems with signal lock. Tracking progress in excellent style.
Climbing the bank on the other side, still tracking our course, without a problem.
A shot of the satellite aquisition and lock.
Installation instructions:
If you don't already have them from our TomTom install you will need to download a shareware program called WinCE CAB Manager from http://www.ocpsoftware.com/download.php .
You will also need winzip from http://www.winzip.com/downwzeval.htm
And of course you will need the Handheld PC version of OziExplorer from http://64.71.184.220/ozice/oziexplorerce1.html
NOTE: We are assuming that you have already woken up Windows CE on the PB GPS 400 using the tutorial here: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=47556
Ok here we go!
1: Download and install Wince Cab Manager trial from http://www.ocpsoftware.com/download.php .
2: Download and install WinZip trial from http://www.winzip.com/downwzeval.htm .
3: Download the HandHeld PC Version of OziExplorer from http://64.71.184.220/ozice/oziexplorerce1.html
4: Locate the handheldpc_setup.exe file that you have just downloaded, right click on it and select WinZIP >> Extract to folder c:\<<whatever is here>. This will extract all the files to a folder called handheldpc_setup.
5: Open the handheldpc_setup folder and locate the .cab file called oziexp.hpc300_arm.CAB open this file in Wince Cab Manager
6: In WinCE CAB Manager you will see a window open that has a few details. We are interested in the processor type. Click on it and right click and select properties we need to change this from StrongARM / Xscale to All / CEF. (Use the pull down menu!!) then click ok and save.
7: Repeat step 5 and 6 for oziexp.hpc211_arm.CAB
8: Double click the Setup.exe in the folder and OziExplorer will now install as normal apart from the fact that you PB400 may warn you that this application is not intended for use on this system. Just say yes to confirm the install and it'll install OK.
GPS Settings:
NMEA (Gps)
Baud Rate 4800
Com 2
And there you have it!
You now have off road routes and tracking on your Packard Bell 400.
Please visit OziExplorer's website or use you favourite search engine for info on making Maps for OziExplorer. ;)
Happy mud plugging!
All the best.
Psi
**Edit to add photos** |
| 15 L A T E S T R E P L I E S (Newest First) |
| lgoff6147 |
Posted - 05 déc. 2006 : 14:24:48
The following link seems to be having problems. Is this available any where else?
http://64.71.184.220/ozice/oziexplorerce1.html
|
| Happyksk |
Posted - 09 sept. 2006 : 21:08:38
Hi there, i have a problem after installing Ozi CE. Under File\ GPS Configaration I cant change the GPS Type from Garmin to NMEA, can someone help me with this?
Another small problem is that i can't get a full screen under Ozi it gives a warning that the GPS400 won't support this. but the pictures Psidoc showes a full screen, help please.
|
| admin_0 |
Posted - 27 juil. 2006 : 04:01:37
quote:
Originally posted by flserranof
Hello.
I've installed OziCE, the handheldPC version, and i've follow all your instructions. (Modified CAB files...) but whe i try to execute OzeCE it gives me an erro fo "... is not a valid WinCE aplication"
How can I solve this proble?
Thanks
me also.
not a valid WinCE aplication
Please help.
Thanks. |
| admin_0 |
Posted - 16 juil. 2006 : 20:56:55
Hello.
I've installed OziCE, the handheldPC version, and i've follow all your instructions. (Modified CAB files...) but whe i try to execute OzeCE it gives me an erro fo "... is not a valid WinCE aplication"
How can I solve this proble?
Thanks |
| admin_0 |
Posted - 16 juil. 2006 : 17:16:39
Where I can find driver for my pb gps 400 and connect it to the PC |
| PsiDOC |
Posted - 16 mai 2006 : 23:06:04
Ken,
Am currently playing with Route 66 on the PB400. Have got it running but cannot find how to get the GPS setup and working. I think this is due to the GPS on Com3 thingy in the registry which does not work - GPS is on Serial onm Com 2 on the PB400 - Yet more intentional firmware barriers methinks!
Ah well these things are sent to try us.
Regards,
Psi
Packard Bell GPS 400 running on TomTom 5 / OziExplorer and Destinator ND (Not used!)
Currently working on yet another hack for the PB 400. 
|
| kenwood |
Posted - 25 avr. 2006 : 20:47:40
PsiDOC 
Hi being the nosey person that I am pray tell us about the other hack for the PB 400
Happy hacking  |
| PsiDOC |
Posted - 19 avr. 2006 : 08:51:09
agatsap, Remi
You are not the only one it seems that has had that problem. Some of the driver files have become corrupted.
Sadly it's hard reset time and re-install from scratch.
All the best.
PSi
Packard Bell GPS 400 running on TomTom 5 / OziExplorer and Destinator ND (Not used!)
Currently working on yet another hack for the PB 400.
|
| admin_0 |
Posted - 19 avr. 2006 : 00:12:56
Hi PsiDOC,
As it seems you are a real DOC, I thought you might be able to help me.
While installing radar files in a different way to get the wav file to tell me the speed limit, I made some kind of (big) mistake.
I had to re-install the whole thing on my PB GPS 400 but I still get the following error much to often but with no particular consequence.
Error window title: "LoadStdBitmap Error :"
Error message: "Unknown Standard Bitmap Code is found : IDB_WAIT_CURSOR1"
Would you have any idea?
Thanks in advance for your help.
Remi. |
| PsiDOC |
Posted - 17 avr. 2006 : 18:12:33
Glad you got it fixed Felix.
All the best.
Psi
Packard Bell GPS 400 running on TomTom 5 / OziExplorer and Destinator ND (Not used!)
Currently working on yet another hack for the PB 400.
|
| felix26 |
Posted - 14 avr. 2006 : 22:57:30
It's OK
Thank you |
| PsiDOC |
Posted - 14 avr. 2006 : 22:24:40
Seems like you have a file association problem. The .cab files are there that's what winrar is picking up. Winrar can be used to open .cab files, but in our case we need to modify it, so please unpack the setup.exe then open WinCE cab manager and use that to open the 2 files above.
Psi
Packard Bell GPS 400 running on TomTom 5 / OziExplorer and Destinator ND (Not used!)
Currently working on yet another hack for the PB 400.
|
| felix26 |
Posted - 14 avr. 2006 : 06:30:41
Bonjour
I'm french
When i extract my file in handheldpc_setup, there are not files .cab but there are files oziexp.hpc300_arm.rar (ou zip)
Where is the file .cab ?
Thank you |
| gpspassion |
Posted - 12 avr. 2006 : 23:38:02
Sure and with things changing so fast GPS wise these we're all "newbies" when it comes to it ;-)
_________________________________________________________________________
Discounts and Assistance/Réductions et Assistance (Club GpsPasSion) / Où commencer? |
| PsiDOC |
Posted - 12 avr. 2006 : 23:34:36
An honour indeed for a newbie.
Merci beaucoup mon ami
Si |
- 
- 
