| Versions |
  |
|
|
Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!
|
| T O P I C R E V I E W |
| NanaimoRick |
Posted - 16 févr. 2011 : 16:53:39
Garmin has release the newest version of City Navigator North America this morning. Although not showing as available for all users yet, some folks are seeing it in their myGarmin.com accounts.
Garmin is probably phasing in availability to balance load on their servers. |
| 15 L A T E S T R E P L I E S (Newest First) |
| beetle-m |
Posted - 06 mai 2011 : 21:08:27
PA = Point Addressing
G&N = Garmin & Navteq |
| NanaimoRick |
Posted - 06 mai 2011 : 19:58:58
beetle-m posted this in another thread:
P = Phonetics for the speech recognition,
HT = Historic Traffic
2D = 2D landmarks,
3DB = 3D Buildings
Still some others in your list without explanation. |
| caryrae |
Posted - 06 mai 2011 : 19:51:05
City Navigator North America NT 2011.40, Deluxe All Regions - JV(G&N)+HT+PA+P, Feb 11
I have the 2460 and on the mygarmin page under manage maps it shows the above message. I know JV means junction view but what do the other abbreviations (G&N)+HT+PA+P mean? |
| ELEGEND_YVR |
Posted - 08 avr. 2011 : 23:06:50
quote:
Originally posted by jsolo213
The tools for converting formats are readily available.
From this site:
http://www.anpo.republika.pl/download.html
Download gmt v0.4.2a, extract the contents of the zip of a folder
(Although the site is in Polish, some other useful tools include wNutrak v0.18, which converts the raw gps.bin logs into mapsource readable .gpx file. There are other tools for making custom mapsets, but i'm not familiar with the rest)
Next, unzip the contents of the attached conversion.zip into the same folder. The batch files are already preset for the 2011.40 mapsets. When 2012.10 comes out, some minor changes will need to be done to both to reflect the new map (path changes, and several mapid lines in convert2.bat will need to be updated).
Copy everything from this folder to clip board, then double click on the shortcut to maps (conversion process is executed AFTER installation of the map update), then paste.
I normally run convert.bat from an administrator level dos command line, but you should be able to just as easily right click, run as admin from windows too.
When done, you will have two sets of maps, the original in C:\ProgramData\GARMIN\Maps (may differ slightly if using win xp), and the converted set specified in the batch file (c:\garmin\CNNANT2011.40). In addition, registry (both 32 and 64 bit) will be updated to reflect the new map locations. The original can be safely removed.
Finally, the converted maps will still be locked. Log into my.garmin.com, under the map details to locate your 25 digit map unlock code In mapsource 6.13.7, ctrl-u to start the unlock wizard.
Information above was gathered from elsewhere on this site.
Looks like I can't attach files to this posting, so get the batch files here:
http://www.multiupload.com/TBYF2CU5XP
Thanks! |
| daveo |
Posted - 23 mars 2011 : 01:46:13
I figured out why I could not complete a download - my firewall was blocking the file. |
| jsolo213 |
Posted - 20 mars 2011 : 06:59:59
The tools for converting formats are readily available.
From this site:
http://www.anpo.republika.pl/download.html
Download gmt v0.4.2a, extract the contents of the zip of a folder
(Although the site is in Polish, some other useful tools include wNutrak v0.18, which converts the raw gps.bin logs into mapsource readable .gpx file. There are other tools for making custom mapsets, but i'm not familiar with the rest)
Next, unzip the contents of the attached conversion.zip into the same folder. The batch files are already preset for the 2011.40 mapsets. When 2012.10 comes out, some minor changes will need to be done to both to reflect the new map (path changes, and several mapid lines in convert2.bat will need to be updated).
Copy everything from this folder to clip board, then double click on the shortcut to maps (conversion process is executed AFTER installation of the map update), then paste.
I normally run convert.bat from an administrator level dos command line, but you should be able to just as easily right click, run as admin from windows too.
When done, you will have two sets of maps, the original in C:\ProgramData\GARMIN\Maps (may differ slightly if using win xp), and the converted set specified in the batch file (c:\garmin\CNNANT2011.40). In addition, registry (both 32 and 64 bit) will be updated to reflect the new map locations. The original can be safely removed.
Finally, the converted maps will still be locked. Log into my.garmin.com, under the map details to locate your 25 digit map unlock code In mapsource 6.13.7, ctrl-u to start the unlock wizard.
Information above was gathered from elsewhere on this site.
Looks like I can't attach files to this posting, so get the batch files here:
http://www.multiupload.com/TBYF2CU5XP
|
| ELEGEND_YVR |
Posted - 19 mars 2011 : 23:01:09
quote:
Originally posted by jsolo213
With a little elbow grease, this version still works well with mapsource 6.13.7. Useful for netbooks and for processing gpx files with way too many track points (raw logging enabled).
Do u have a link with instructions? Thx |
| daveo |
Posted - 14 mars 2011 : 04:59:45
I have been trying to install the Maps for two days and after several hours of trying to download, they fail. I have been trying it with the updates for my computer. Now trying with just the Maps. Anyone else have this problem. |
| tampa8 |
Posted - 09 mars 2011 : 22:33:59
quote:
Originally posted by speedlever
I've noticed that my 1690 is taking longer (5 to 10 seconds longer, I'd guess) to boot up after installing this map update. Anyone else seeing that?
Don't know, can't see your 1690....Sorry, had to ...  |
| Bivotar1 |
Posted - 26 févr. 2011 : 08:32:58
Yes, I've noticed that also on my 3790 with the new Europe map. I've noticed also that TrafficTrends isn't working anymore . . . |
| speedlever |
Posted - 25 févr. 2011 : 23:52:07
I've noticed that my 1690 is taking longer (5 to 10 seconds longer, I'd guess) to boot up after installing this map update. Anyone else seeing that?
|
| gpspassion |
Posted - 23 févr. 2011 : 23:13:48
Finally managed to update the maps on my 1695 using my new laptop it seemed the updater was disconnecting my connection, putting back FireFox in "online mode" fixed it somehow, don't ask me why!
Installed Mapsource and Basecamp on this new laptop and was able to get some useful statistical data on my week-end trips ;-) |
| jsolo213 |
Posted - 22 févr. 2011 : 00:17:22
With a little elbow grease, this version still works well with mapsource 6.13.7. Useful for netbooks and for processing gpx files with way too many track points (raw logging enabled). |
| Puffins Nest |
Posted - 21 févr. 2011 : 23:10:32
Thanks Dan. |
| danham |
Posted - 21 févr. 2011 : 21:35:05
For CN NT NA, go to the following link, click View Map and follow the directions:
https://buy.garmin.com/shop/shop.do?cID=253&pID=1456
-dan |
|
|
| This page was generated in 0,38 seconds. |
 |
|
- 
- 
