| Versions |
  |
|
|
Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!
|
| T O P I C R E V I E W |
| g_alin |
Posted - 08 juil. 2009 : 04:40:28
This post is intended for firmware upgrades (original or custom).
As a general rule, this post will be updated (from time to time) to reflect latest documents (or versions).
Last update: Tuesday, Jul 20, 2010
Question 1: what devices can be upgraded?
Answer 1: (until now) this procedure was tested on Mio C220_NA; C320; C520_EEU; C520T_WEU
Tested performed by: Mio C220_NA (me),Mio C250_EEU (tgg2k) , Mio C520_EEU (asgaard: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=111274&whichpage=5) C520T_WEU (krisvw: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=111274&whichpage=4), C320 (zeluis_cps: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=111274&whichpage=6), C520T_WEU (PeterMJ: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=111274&whichpage=6)
Question 2: how can I upgrade the firmware?
Answer 2: There is a small utility that is able to activate the UPGRADE screen. This upgrade screen will provide you the possibility to upgrade two components: uboot and wince.
http://www.4shared.com/file/cvkc5b2z/UPGRADE_MIO_11Jun10.html
In this package you’ll find the documentation available to perform the upgrade.
- Menu structure can be found in file menu.txt (UPGRADE_MIO_ddmmmyy.zip\SDCard\documents\menu.txt)
- Procedure (how to upgrade) can be found in file read-me.txt (UPGRADE_MIO_ddmmmyy.zip\SDCard\documents\read-me.txt)
WARNING: I DON'T RECOMMEND TO UPGRADE UBOOT.
WARNING: IN SOME CASES (read read-me.txt carefully) ALL THE INFORMATION FROM “MY FLASH DISK” MAY BE LOST, DO A BACK-UP FIRST.
Question 3: How can I come back to my old firmware (if I don’t like this new firmware)?
Answer 3: After you performed the upgrade is recommended to left the UPGRADE screen activated for a period of time (days, weeks) until are you 100% sure that your device is stable. After that you can disable the UPGRADE screen.
The firmwares that I have (so far) are:
C220_NA (R06.3.0165.0315) http://www.4shared.com/file/129432373/b6157f94/C220_NA_ROM_R06301650315.html (better option than R06.3)
C220_NA (R08.3.0165.0611) http://www.4shared.com/file/129432408/6bc9265e/C220_NA_ROM_R08301650611.html
C220_RUS (R05.3.0171.0911) http://www.4shared.com/file/129434239/16056665/C220_RUS_ROM_R05301710911.html
C220_WEU (R04.3.0168.0316) http://www.4shared.com/file/153597068/221d4465/C220_WEU_ROM_R04301680316.html
C220_WEU (R05.4.0168.0425) http://www.4shared.com/file/153632930/a59a99a0/C220_WEU_ROM_R05401680425.html
C220_EEU (R02.3.0173.0608) http://www.4shared.com/file/225563080/efefe1b9/C220_EEU_ROM_R02301730608.html
C220_EEU (MioMap2008?) (R02.0170_V2.00.0000) http://www.4shared.com/file/230500935/70c78205/C220_EEU_ROM_R020170_V2000000.html
C220_EEU (Turkey ONLY) (R04.3.0172.0911) http://www.4shared.com/file/129442246/5eb06eff/C220_EEUT_ROM_R04301720911.html
C220_RUS-rev.230 (R00.2.9952.0229.64Mb) http://www.4shared.com/file/203306716/9d333d88/C220_RUS_ROM_R0029952022964Mb.html (base on SMDK2443)
C230_EU (C230.V1.10.0007) http://www.4shared.com/file/rVXWU7v3/C230_EU_ROM_C230V1100007.html
C250_EEU (R03.3.0164.0416) http://www.4shared.com/file/129443927/cb04716b/C250_EEU_ROM_R03301640416.html
C250_EU (MioMap2008?) (R02.0164_v2.00.0000) http://www.4shared.com/file/134364541/2a48b083/C250_EU_ROM_-_R020164_v2000000.html
I am not sure, but the firmware from C250 may work on C250 Plus also (and vice versa)
C250_Plus_EU (R11.3.0160.1107) http://www.4shared.com/file/134361154/73ee2da3/C250_EU_ROM_R11301601107.html
C250_Plus_EU (R17.4.0160.0917) http://www.4shared.com/file/143885453/7eb69489/C250_EU_ROM_R17401600917.html (better option than R11.3)
C320_NA (R40.3.9904.0720) http://www.4shared.com/file/129459508/324a3ec8/C320_NA_ROM_R40399040720.html
C320_WEU (R37.3.9926.0702) http://www.4shared.com/file/129446046/d2562dc6/c320_WEU_ROM_R37399260702.html
C320_CHS (R02.3.9964.0511) http://www.4shared.com/file/258646102/6862d98f/C320_CHS_ROM_R02399640511.html
C320b_WEU (R01.3.9918.1017) http://www.4shared.com/file/njtPwqXa/C320b_WEU_ROM_R01399181017.html
C520_WEU (R37.3.9931.0816) http://www.4shared.com/file/129460987/599e656f/C520T_WEU_ROM_R37399310816.html
C520_EEU (R02.3.9911.1018) http://www.4shared.com/file/129461850/cb2a83d3/C520_EEU_ROM_R02399111018.html
C520_EEUT (MioMap2008) (ROM_V1.00.0003) http://www.4shared.com/file/129467782/bebd8453/C520_EEUT_ROM_V1000003.html
C520_EEU_RUS (R45.3.9966.1010) http://www.4shared.com/file/129461931/ebb57ef4/C520_EEU_ROM_R45399661010.html
C520_EEU_RUS (R02.3.9834.0729) http://www.4shared.com/file/04fVJmIe/C520_EEU_RUS_ROM_R02398340729.html (traffic jams information over GPRS)
C520_EEU_HEBRAIC (R40.3.9932.0709) http://www.4shared.com/file/136394618/396ac4c3/C520_EEU_ROM_R40399320709.html
C520_AUS (R39.3.9965.0801) http://www.4shared.com/file/129463416/e536d20d/C520_AUS_ROM_R39399650801.html
C520_AUS (R41.3.9965.1031) http://www.4shared.com/file/214445692/a0781e28/C520_AUS_ROM_R41399651031.html
C520_NA (R48.3.9937.1026) http://www.4shared.com/file/143829336/5daf761c/C520_NA_ROM_R48399371026.html
C720t_NA (R05.3.9905.0912) http://www.4shared.com/file/cHT4tbIq/C720t_NA_ROM_R05399050912.html
C720_EEUT (R02.3.9913.1018) http://www.4shared.com/file/NNKvfU6C/C720_EEUT_ROM_R02399131018.html
Older series:
C310_ENG_EEU_RUS (R36F.3.1100.0702) http://www.4shared.com/file/129464116/7e2a285f/C310_ENG_RUS_ROM_R36F311000702.html
C510_ENG_EEU_RUS (R35F.3.126.0711) http://www.4shared.com/file/129466625/6348f428/C510_ENG_RUS_ROM_R35F31260711.html
C510_ENG_EEU (OSCAR210AEEUR33F) http://www.4shared.com/file/129466192/1b97aec5/C510_EEU_R33F.html
C710_ENG_EUR (R33F.2.112.517) http://www.4shared.com/file/243375100/4d19a84a/C710_ENG_R33F2112517.html
backup - http://www.4shared.com/file/LUxw_lk-/C710_ENG_ROM_R33F2112517.html
C710_ENG (R30F.3.122.721) http://www.4shared.com/file/D2JenqM-/C710_R30F3122721.html
H610_NA (R38.2.0153.1010) http://www.4shared.com/file/194548050/351060b2/H610_NA_ROM_R38201531010.html
H610_WEU (R50.3.0150.1123) http://www.4shared.com/file/239872283/472a538c/H610_WEU_ROM_R50301501123.html
Other Mio/Mitac Clones:
Clarion EZD580, it is marketed in Europe under the names Clarion Map780 and Clarion MAP680:
Clarion EZD580 (R10.4.1331.0512) http://www.4shared.com/file/237243823/beea7b5e/Clarion_EZD580_ROM_R1041331051.html
If you have a different firmware you need to back-up your wince. To do that, you need DiscRW utility.
If your device is unlocked and you can run applications on your PNA, try to use this DiskRW software:
http://www.4shared.com/file/134354901/9ef633/DiskRW.html
instructions:
1.Start DiskRW
2.Select from combo-box (close to 'Store:') -> SMFlash
3.Press '...' button and select 'Storage Card' (where to save your SMFlash.img); If '...' doesn't work you can write (using any keyboard you have) the name of the SDCard folder of your PNA (ex: \Storage Card\, \SDMMC\ ...)
4.Press 'Read' button. A Hourglass will appear and it will take approx. 30 sec.
If the above application doesn't work, you should contact me to (on this thread) to fins a solution. Because every device is different I can’t give you a DiskRW custom made for your model.
For wince 4.2: you can use also bkondisk.exe (http://hpcmonex.net/roms/bkondisk.zip). For more info check: http://www.gpspassion.com/FORUMSEN/topic.asp?TOPIC_ID=82603&whichpage=2
Question 4: I lost 'My Flash Disk' can I recover it with this procedure?
Answer 4: Yes. You have to use 'wince by USB (Format)' to format your 'My Flash Disk'.
WARNING: ALL THE INFORMATION FROM “MY FLASH DISK” WILL BE LOST (and there is nothing you can do to save it).
Question 5: There is anything else that I should know?
Answer 5: Yes. There are no warranties what so ever; so all you do is on your own risk. Anyway I can tell you that I uploaded on my GPS (C220_NA) many not compatible firmwares. I wouldn’t recommend you to do that until you really know what you are doing. If you check the firmware before and is using the same SMFlash memory area, like your device, (theoretically) there is no risk. But like I said: DON’T TRY THAT (unless you really know what you’re doing).
Those Q/A will cover most of the questions, but if you have other questions (or any advice) please let me know. When other firmwares will be available I will update this post.
Custom firmwares (usually ‘custom’ stands for ‘changed’ - aka ROM cooking).
software need it to change a firmware: ROMMasterCE5 (v.1.9.9) - http://www.4shared.com/file/237775472/8f86f256/ROMMasterCE_ver199.html
1. This is based on ROM R08.3 (NA) and has the explorer (taskbar) added. (doesn't work with C250!)
http://www.4shared.com/file/129470682/1fc8ff6d/C220_NA_ROM_R08_Desktop_1.html
Known bugs:
- There is a file 'desktop.ini' on every folder (from the GPS) – including Desktop.
- The menu 'send to Desktop as a shortcut' is not working.
2. This is based on ROM R08.3 (NA) and has the explorer (taskbar) and all office components added. (doesn’t work with C250!)
http://www.4shared.com/file/129470932/f760619b/C220_NA_ROM_R08_Desktop_2.html
Known bugs:
- There is a file 'desktop.ini' on every folder (from the GPS) – including Desktop.
- The menu 'send to Desktop as a shortcut' is not working.
3. This is based on ROM R08.3 (NA) and has the explorer (taskbar) and all office components added. Has a Navigator.lnk shortcut from Desktop to \My Flash Disk\MioMap\Miomap\Miomap.exe. If you have, more than one, navigation software you can place a script there - using mortscript switch command; to be able to start any of those applications. Also previous version has the FSRAMPERCENT to small -> was increased to 1.5M (doesn’t work with C250!)
http://www.4shared.com/file/129471186/a5564a94/C220_NA_ROM_R08_Desktop_3.html
Known bugs:
- There is a file 'desktop.ini' on every folder (from the GPS) – including Desktop.
- The menu 'send to Desktop as a shortcut' is not working.
- Taskbar is on top of the navigation software. FIX: Start \ Settings \ Taskbar and Start Menu -> CHECK Auto hide
With srelioskoz help we have a recovery method also for MOOV series :)
============================================================================================================
FIRST OF ALL DO NOT TRY ANYTHING IN YOUR MIO BEFORE YOU READ ALL THIS POST
IF YOU DON'T SEE YOUR FIRMWARE AVAILABLE, DON'T TRY TO USE ANOTHER FIRMWARE, FIRST DOWNLOAD THE SMFLASH.IMG (TO BE ABLE TO RESTORE YOU DEVICE, LATER ON) AND ONLY AFTER THAT YOU CAN PLAY WITH OTHER FIRMWARES.
1)how to upgrade mio moov firmware
http://www.4shared.com/file/191674275/ad12bab0/cobia_420_64.html
mirror: http://www.4shared.com/file/194360726/ff50dd57/cobia_420_64.html
download this file and put it in your sd card (this is for mio moov 360 if you have another mio moov you must rename the folder)
Moov 150 - European: Cobia_300L_32, North American: Cobia_300L_32_NA, Australian: Cobia_300L_32_AU
Moov 200 - European: Cobia_300_32, North American: Cobia_300_64_NA, Australian: Cobia_300_32_AU
Moov 200u - European: Cobia_300_64, North American: Cobia_300_64_NA, Australian: Cobia_300_64_AU
Moov 210 - European: Cobia_T300_32, North American: Cobia_T300_64_NA, Australian: Cobia_T300_32_AU
Moov 300 - European: Cobia_400_64, North American: Cobia_400_64_NA, Australian: Cobia_400_64_AU
Moov 310 - European: Cobia_T400_64, North American: Cobia_T400_64_NA, Australian: Cobia_T400_64_AU
Moov 330 - European: Cobia_410_64, North American: Cobia_410_64_NA, Australian: Cobia_410_64_AU
Moov 360 - European: Cobia_420_64, North American: Cobia_420_64_NA, Australian: Cobia_420_64_AU
Moov 370 - European: Cobia_T420_64, North American: Cobia_T420_64_NA, Australian: Cobia_T420_64_AU
Moov 500 - European: Cobia_500_64, North American: Cobia_500_64_NA, Australian: Cobia_500_64_AU
Moov 500 R2 - European: Cobia500R2, North American: Cobia500R2_NA, Australian: Cobia500R2_AU
Moov 510 - European: Cobia_T500_64, North American: Cobia_T500_64_NA, Australian: Cobia_T500_64_AU
Moov 560 - European: Cobia_520_64, North American: Cobia_520_64_NA, Australian: Cobia_520_64_AU
Moov 580 - European: Cobia_T550_64, North American: Cobia_T550_64_NA, Australian: Cobia_T550_64_AU
when you start up your mio this program will start by it self and will ask you if you want USERMODE or SUPERMODE
choose USERMODE and OK to all it ask you.
then put power button to reset position and on again
your mio moov will start with blue upgrade screen.
download the firmware of your mio and put the files winceimg.cks and winceimg.bin in your sd card (use small cards 128M -> 1G)
startup your mio and you can see blue upgrade screen
touch on screen and choose
0=wince upgrade and put power button to off and then to on position
0=wince by sd/mmc (format) off and then on
mio moov will start the upgrade firmware
when it finish restart your mio without sd card and connect it to pc
open mio more desktop and write again mio map program and the map.
then put the power button to reset position and put the power button to on position
when you see the black screen with firmware of your mio ,push inside the sd card
your mio will ask you if you want USERMODE or SUPERMODE ... choose SUPERMODE and ok to all it ask you
this is the firmware for mio moov 330 europe
http://www.4shared.com/file/189985580/6b5048ed/MOOV330_EU_ROM_V1000019.html
firmware of moov 360 europe
http://www.4shared.com/file/165538541/90b06686/MOOV_360_ROM.html
firmware of mio 300 europe
THIS IS NOT A GOOD FIRMWARE ... DON'T TRY TO LOAD IT
http://www.gpspassion.com/upload2/MOOV300_ .... winceimg.zip
2)How to repair your mio if no connection with pc
look this video to found how to make mio moov upgrade screen
http://www.youtube.com/watch?v=KKM7C_6UYkw
look this video how to open mio moov application
http://www.youtube.com/watch?v=ZLKSG3U2VYk
look this link .on 4 page you can see the pinout of cobia electronic part (memory IC)
http://downloads.qi-hardware.com/hardware/datasheets/qi_lb60/U9~K9GAG08U0M~~2GB-FINAL_NAND-NOT_ON_SOME_PROTOTYPES~~.pdf
- Old version (ITS NOT WORKING FOR COBIA_300_32)
first put the sd card in to mio
1)put the power button to RESET position
2)carefully connect the wire as you see on the picture http://www.4shared.com/file/192360271/79584b60/moov330pcbback1.html
3)put the power button to ON position
4)you will see the blue screen
5)take the wire from the connect
6)if you want the normal screen put again the power swich to RESET position
7)if you want to make a selection when you have blue screen, touch on screen and then put the power buton to OFF and then ON position
8)DO NOT MAKE FORMAT SELECTION IF YOU DONT HAVE THE RIGHIT FIRMWARE
- New version (ITS WORKING FOR COBIA_300_32) - confirmed only by srelioskoz
1) first make a short between pin 12(vcc)and pin 19 (write protect). IC name should be something with K9GAG08U0M ... with 48 pins
2) then put the power button from RESET to ON for 4-5 seconds
3) then put the power to RESET
4) then make a short between pin 9 and GND and put power button to ON. GND its any matal used for shielding ...
FINALLY: then you see the blue screen.
5)if you want to make a selection when you have blue screen, touch on screen and then put the power buton to OFF and then ON position
6)DO NOT MAKE FORMAT SELECTION IF YOU DONT HAVE THE RIGHIT FIRMWARE
--------------------------------------------------------------------------------
download the firmware of your mio and put the files winceimg.cks and winceimg.bin in your sd card
with blue upgrade screen touch on screen and choose
0=wince upgrade and put power button to off and then to on position
0=wince by sd/mmc (format) off then on
mio moov will start the upgrade firmware
when it finish restart your mio and connect it to pc
open MioMore Desktop and write again mio map program and the map.
i d like to say thanks to g_alin for his help
STELIOS FROM GREECE
============================================================================================================
MOOV firmwares (some new devices don't have Recovery CD - in that case you should copy all data from \My Flash Disk folder before upgarade)
Moov150_EU (Cobia_300L_32) (ROM_V1.00.0024) http://www.4shared.com/file/257616884/78a132a4/Moov_150_Cobia_300L_32_EU_V100.html (not confirmed)
MOOV200_EU N177 (ROM_V1.00.0030) http://www.4shared.com/file/219174788/96724186/Moov200_EU_ROM_V1000030.html
Moov200_EU (Cobia_300_32) (ROM_V1.00.0019) http://www.4shared.com/file/243403980/19dc08e/Moov_200_Cobia_300_32_EEU_V100.html
MOOV330_EU (ROM_V1.00.0019) http://www.4shared.com/file/189985580/6b5048ed/MOOV330_EU_ROM_V1000019.html
MOOV330_EU (ROM_V1.00.0028) http://www.4shared.com/file/195309548/19093226/MOOV330_EU_ROM_V1000028.html
MOOV330_EEU (ROM_V1.00.0000) http://www.4shared.com/file/241960405/70275e3/Moov_330_Cobia_410_EEU_V100000.html
MOOV360_EU (ROM_V1.00.0021) http://www.4shared.com/file/194369290/8e042cc8/MOOV360_EU_ROM_V1000021.html
Moov370_EU(N179) (ROM_V1.00.0019_Cobia_T420_64_V_5.50.0212) http://www.4shared.com/file/YHquQBF3/Moov370_EU_ROM_V1000019.html
MOOV500_EU (ROM_V1.00.0004) http://www.4shared.com/file/218540220/91a947f0/MOOV500_EU_ROM_V1000004.html
MOOV500R2_NA (ROM_V1.9540.0012) http://www.4shared.com/file/194616656/765533d8/MOOV500R2-NA_ROM_V195400012.html
MOOV560_EU (ROM_T550R2.V1.00.0003) http://www.4shared.com/file/218546681/3e2368ec/Moov560_EU_ROM_T550R2V1000003.html
MoovS501_NA (ROM_SEEKER.R11.00.0657.STF128M) http://www.4shared.com/file/-QE96stQ/MoovS501_NA_ROM_SEEKERR1100065.html
MoovS505_EU (ROM_SEEKER.R16.00.0773.STF128M) http://www.4shared.com/file/237769132/9a9763b1/MoovS505_EU_ROM_SEEKERR1600077.html
MoovS568_EU (ROM_SEEKER.R20.00.0844.STF128M) http://www.4shared.com/file/237280467/3b4c1c8/MoovS568_EU_ROM_SEEKERR2000084.html
For the spirit(MIO MOOV S568), after flashing the firmware, the software can be reinstalled with the current latest version downloadable at:
https://register.navman.com/installer/?BRANDNAME=mio&HARDWARENAME=SEEKER_FT525&SKUID=9248&DISPLAYNAME=Moov%20S568&LANGUAGE=en-US&DEVICEVERSION=6.10
Other ROMS
NAVMAN S55 (ROM_S55.V1.00.0005) http://www.4shared.com/file/P1B5zciI/S55_ROM_S55V1000005.html
|
| 15 L A T E S T R E P L I E S (Newest First) |
| D3ffeCT |
Posted - 28 juil. 2010 : 23:08:47
quote:
Originally posted by srelioskoz
g-alin you was right.
but now a new problem
the mio moov 330 application is from other guy and i speak with him with messages
Waiting!! BOOTSEC is in Sector 233!!
MountDisk SUCCESS!
Open CEimage...
Checksum: 0x43a048e6
Writing CE image...
Unknown image type
Any key to continue
Read Progress :100%
he have tryed all 3 firmwares and the same problem
the upgrade screen is like this
0=Base & Region CE Upgrade
1=GPS Tools
2=BT Tools
3=Base CE Upgrade
4=UBOOT Upgrade
5=Memory Tools
6=Other Tools
0=Base by SD/MMC (Format)
1-Base by SD/MMC
2=Base by USB (Format)
3=Base by USB
4=Exit
he try 3 and then 0
try like this,first go to 6=other tools,make format,than try again to rewrite firmware |
| srelioskoz |
Posted - 28 juil. 2010 : 23:00:53
g_alin
ok i asked him to tell me the firmware of his aplication when it starts up with black screen |
| g_alin |
Posted - 28 juil. 2010 : 21:49:20
srelioskoz,
this menu is like Spirit's menu -> probably the hardware changed (is not like Moov_330_Cobia_410_EEU_V1.00.0000 that we have the firmware). Can you find a SMFlash from an identical device (to check the differences ...)?
Is possible to need to have 4 files (2 x winceimg and 2 x region ) ... I don't know for now ... let me know if you find the SMFlash of this device.
daniel1605
please try this one ... (sorry ... but will be a long set of 'tryings' until we figure out the right format ... I hope you'll manage to help us with patience).
http://www.4shared.com/file/ojzm_21Q/testM300_1.html
stany,
have you tried the new method (Pin9 + GND ....) of entering into BlueScreen (that works also with Moov220)? - check first page |
| stany |
Posted - 28 juil. 2010 : 20:48:15
Any ideeas about my problem? |
| daniel1605 |
Posted - 28 juil. 2010 : 20:47:05
Hi to all,
@g_alin
You have made new smflashimg, look at page 54.
link to file http://www.4shared.com/file/OjcoAkTH/testM300.html
i tested file and no luck.
|
| srelioskoz |
Posted - 28 juil. 2010 : 20:31:27
g-alin you was right.
but now a new problem
the mio moov 330 application is from other guy and i speak with him with messages
Waiting!! BOOTSEC is in Sector 233!!
MountDisk SUCCESS!
Open CEimage...
Checksum: 0x43a048e6
Writing CE image...
Unknown image type
Any key to continue
Read Progress :100%
he have tryed all 3 firmwares and the same problem
the upgrade screen is like this
0=Base & Region CE Upgrade
1=GPS Tools
2=BT Tools
3=Base CE Upgrade
4=UBOOT Upgrade
5=Memory Tools
6=Other Tools
0=Base by SD/MMC (Format)
1-Base by SD/MMC
2=Base by USB (Format)
3=Base by USB
4=Exit
he try 3 and then 0 |
| John Dough |
Posted - 28 juil. 2010 : 14:06:03
Hi Guyz,
I found a unlock program and it unlocked the unit so now I have the desktop but when I try to load say Igo8 on a SD card it says it can't find ST smart and bombs out.
I can see tthe original moov soft on the flash disk but this won't load either.
Can someone guide me how to add new gps software to this unit?
thanks |
| g_alin |
Posted - 28 juil. 2010 : 03:23:50
srelioskoz
did you tried to write Base and Region? For that you need to have 4 files on the SDCard: winceimg.bin, winceimg.cks, region.bin and region.cks.
Probably you don't ave those files on the SDCard ...
daniel1605,
please tell me (remind me) what files did you used with Base & Region ce upgrade (Don't use Format ... could be dangerous in some cases).
John Dough,
let me know if you find the SMFlash.img for your device... |
| kener |
Posted - 27 juil. 2010 : 19:46:53
John Dough
If you can make a SMFlash image
and if g_alin have time to make a rom from it.
I try to get the rom working on my moov 370 |
| John Dough |
Posted - 27 juil. 2010 : 18:48:10
Thanks for your reply the email pms have been suspended here and I don't think I am allowed to post a email addy in a open forum.
I have reloaded all the original files back to the mio by USB and although they all show up in the correct folders it still will not start up ,all I get is the orange screen and then it shows a usb lead has to be connected did that and the transfer folders float about as if connected correctly so a really weird one this as it seems something has gone astray during the backup .
I compared all the folders etc. in the Mio with the backup copy and they all match okay but there is obviously something missing.
any help appreciated.
PS forgot to say it has the following rom:cobiat 420 v001 00 0029 if that means anything.Cheers
|
| kener |
Posted - 26 juil. 2010 : 19:56:24
John Dough
If the moov has a reloaded rom file it starts with
the usb connection and if you connect it to a pc
with explorer you will find a flash disk with only the file device.xml
this file have some info inside ,device id, skuid, and more
the skuid number is the region and version number of the software that will be installed and needs to be inside the miomore software to function.
if you have a copy of the flash disk just copy it back and it works.
need a email adres to give more info, a pm her on the site do not work.
PS:
Strange to see that the usb connection works with a empty flash disk
as there are people that have no more usb connection after playing with the appstartup file ?
|
| John Dough |
Posted - 26 juil. 2010 : 15:46:44
quote:
Originally posted by kener
Did Found some information about the samsung 2443 cpu
maybe it give some solutions
found here http://www.mediafire.com/?g98qdyuctf8nalk
Hi Kener hope you can help me I see you have a Moov 370 I have a problem reloading the original software to mine ,have you ever used the miomore desktop to reload the original soft as I tried to do this with it but the option to reload is shaded also tried by usb and the soft is showing on the drive but no application will start I just get the mio orange screen and the usb cable screen.Any assitance appreciated Thanks John |
| daniel1605 |
Posted - 25 juil. 2010 : 19:50:08
Hi,
i also tried latest flash for M300
base ce upgrade
base by usb(format):
writing ce image...
unknown image type
any key to continue
restart your device
and also tried:
Base & Region ce upgrade
Base & Region by usb (format):
Region image filesize overflow.
any key to continue. |
| srelioskoz |
Posted - 25 juil. 2010 : 12:05:37
g_alin what mean this message in mio moov 330?
waiting!!
BOOTSEC is in sector 233!!
MountDisk SUCCESS!
Open Region image...
Can not find REGION.CKS
Write Region Fail! Please Retry!
Any Key To continue
|
| czoran |
Posted - 23 juil. 2010 : 21:29:15
Hello,
Thank you g_alin for latest flash image, but unfortunately I can not try it.
Somehow I can not power on my device any more. Tried with another battery, charging overnight, pin9... Dead. I was not touching it for few days after I discovered that it is restarting all the time. I suspect it is hardware fault. Maybe flash chip.
Any hints are welcome.
BR
|
|
|
| This page was generated in 0,56 seconds. |
 |
|
- 
del.icio.us
