| Versions |
  |
|
|
Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!
|
| T O P I C R E V I E W |
| g_alin |
Posted - 08 juil. 2009 : 04:40:28
This post is intended for firmware upgrades (original or custom).
As a general rule, this post will be updated (from time to time) to reflect latest documents (or versions).
Last update: Monday, Aug 08, 2011
Question 1: what devices can be upgraded?
Answer 1: (until now) this procedure was tested on Mio C220_NA; C320; C520_EEU; C520T_WEU
Tested performed by: Mio C220_NA (me),Mio C250_EEU (tgg2k) , Mio C520_EEU (asgaard: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=111274&whichpage=5) C520T_WEU (krisvw: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=111274&whichpage=4), C320 (zeluis_cps: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=111274&whichpage=6), C520T_WEU (PeterMJ: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=111274&whichpage=6)
Question 2: how can I upgrade the firmware?
Answer 2: There is a small utility that is able to activate the UPGRADE screen. This upgrade screen will provide you the possibility to upgrade two components: uboot and wince.
http://www.4shared.com/file/cvkc5b2z/UPGRADE_MIO_11Jun10.html
In this package you’ll find the documentation available to perform the upgrade.
- Menu structure can be found in file menu.txt (UPGRADE_MIO_ddmmmyy.zip\SDCard\documents\menu.txt)
- Procedure (how to upgrade) can be found in file read-me.txt (UPGRADE_MIO_ddmmmyy.zip\SDCard\documents\read-me.txt)
WARNING: I DON'T RECOMMEND UPGRADING UBOOT.
WARNING: IN SOME CASES (read read-me.txt carefully) ALL THE INFORMATION FROM “MY FLASH DISK” MAY BE LOST, DO A BACK-UP FIRST.
Question 3: How can I come back to my old firmware (if I don’t like this new firmware)?
Answer 3: After you performed the upgrade is recommended to left the UPGRADE screen activated for a period of time (days, weeks) until are you 100% sure that your device is stable. After that you can disable the UPGRADE screen.
The firmwares I have (so far) are:
C220_NA (R06.3.0165.0315) http://www.4shared.com/file/129432373/b6157f94/C220_NA_ROM_R06301650315.html (better option than R06.3)
C220_NA (R08.3.0165.0611) http://www.4shared.com/file/129432408/6bc9265e/C220_NA_ROM_R08301650611.html
C220_RUS (R05.3.0171.0911) http://www.4shared.com/file/129434239/16056665/C220_RUS_ROM_R05301710911.html
C220_WEU (R04.3.0168.0316) http://www.4shared.com/file/153597068/221d4465/C220_WEU_ROM_R04301680316.html
C220_WEU (R05.4.0168.0425) http://www.4shared.com/file/153632930/a59a99a0/C220_WEU_ROM_R05401680425.html
C220_EEU (R02.3.0173.0608) http://www.4shared.com/file/225563080/efefe1b9/C220_EEU_ROM_R02301730608.html
C220_EEU (MioMap2008?) (R02.0170_V2.00.0000) http://www.4shared.com/file/230500935/70c78205/C220_EEU_ROM_R020170_V2000000.html
C220_EEU (Turkey ONLY) (R04.3.0172.0911) http://www.4shared.com/file/129442246/5eb06eff/C220_EEUT_ROM_R04301720911.html
C220_RUS-rev.230 (R00.2.9952.0229.64Mb) http://www.4shared.com/file/203306716/9d333d88/C220_RUS_ROM_R0029952022964Mb.html (base on SMDK2443)
C230_EU MioMap2008 (C230.V1.10.0007) http://www.4shared.com/file/rVXWU7v3/C230_EU_ROM_C230V1100007.html
C230_NA MioMap3.3 (R10.2.9941.0822.64MB) http://www.4shared.com/file/9fhTgJjS/C230_NA_ROM_R1029941082264MB.html
C250_EEU (R03.3.0164.0416) http://www.4shared.com/file/129443927/cb04716b/C250_EEU_ROM_R03301640416.html
C250_EU (MioMap2008?) (R02.0164_v2.00.0000) http://www.4shared.com/file/134364541/2a48b083/C250_EU_ROM_-_R020164_v2000000.html
I am not sure, but the firmware from C250 may work on C250 Plus also (and vice versa)
C250_Plus_EU (R11.3.0160.1107) http://www.4shared.com/file/134361154/73ee2da3/C250_EU_ROM_R11301601107.html
C250_Plus_EU (R17.4.0160.0917) http://www.4shared.com/file/143885453/7eb69489/C250_EU_ROM_R17401600917.html (better option than R11.3)
C320_NA (R40.3.9904.0720) http://www.4shared.com/file/129459508/324a3ec8/C320_NA_ROM_R40399040720.html
C320_WEU (R37.3.9926.0702) http://www.4shared.com/file/129446046/d2562dc6/c320_WEU_ROM_R37399260702.html
C320_CHS (R02.3.9964.0511) http://www.4shared.com/file/258646102/6862d98f/C320_CHS_ROM_R02399640511.html
C320b_WEU (R01.3.9918.1017) http://www.4shared.com/file/njtPwqXa/C320b_WEU_ROM_R01399181017.html
C520_WEU (R37.3.9931.0816) http://www.4shared.com/file/129460987/599e656f/C520T_WEU_ROM_R37399310816.html
C520_EEU (R02.3.9911.1018) http://www.4shared.com/file/129461850/cb2a83d3/C520_EEU_ROM_R02399111018.html
C520_EEUT (MioMap2008) (ROM_V1.00.0003) http://www.4shared.com/file/129467782/bebd8453/C520_EEUT_ROM_V1000003.html
C520_EEU_RUS (R45.3.9966.1010) http://www.4shared.com/file/129461931/ebb57ef4/C520_EEU_ROM_R45399661010.html
C520_EEU_RUS (R02.3.9834.0729) http://www.4shared.com/file/04fVJmIe/C520_EEU_RUS_ROM_R02398340729.html (traffic jams information over GPRS)
C520_EEU_HEBRAIC (R40.3.9932.0709) http://www.4shared.com/file/136394618/396ac4c3/C520_EEU_ROM_R40399320709.html
C520_AUS (R39.3.9965.0801) http://www.4shared.com/file/129463416/e536d20d/C520_AUS_ROM_R39399650801.html
C520_AUS (R41.3.9965.1031) http://www.4shared.com/file/214445692/a0781e28/C520_AUS_ROM_R41399651031.html
C520_NA (R48.3.9937.1026) http://www.4shared.com/file/143829336/5daf761c/C520_NA_ROM_R48399371026.html
C620_WEU (R06.3.9906.1106) http://www.4shared.com/file/_fAKcgsz/C620_WEU_ROM_R06399061106.html
C720t_NA (R05.3.9905.0912) http://www.4shared.com/file/cHT4tbIq/C720t_NA_ROM_R05399050912.html
C720_EEUT (R02.3.9913.1018) http://www.4shared.com/file/NNKvfU6C/C720_EEUT_ROM_R02399131018.html
C720b_EEU (R01.3.9977.0117) http://www.4shared.com/file/jy83EB-X/C720b_EEU_ROM_R01399770117.html
Older series:
C310_ENG_EEU_RUS (R36F.3.1100.0702) http://www.4shared.com/file/129464116/7e2a285f/C310_ENG_RUS_ROM_R36F311000702.html
C510_ENG_EEU_RUS (R35F.3.126.0711) http://www.4shared.com/file/129466625/6348f428/C510_ENG_RUS_ROM_R35F31260711.html
C510_ENG_EEU (OSCAR210AEEUR33F) http://www.4shared.com/file/129466192/1b97aec5/C510_EEU_R33F.html
C710_ENG_EUR (R33F.2.112.517) http://www.4shared.com/file/243375100/4d19a84a/C710_ENG_R33F2112517.html
backup - http://www.4shared.com/file/LUxw_lk-/C710_ENG_ROM_R33F2112517.html
C710_ENG (R30F.3.122.721) http://www.4shared.com/file/D2JenqM-/C710_R30F3122721.html
C710_ENG_EU (NL) (R34F.3.112.928) http://www.4shared.com/file/xtsrf1Yl/C710_ENG_EU__NL__R34F3112928.html
H610_NA (R38.2.0153.1010) http://www.4shared.com/file/194548050/351060b2/H610_NA_ROM_R38201531010.html
H610_WEU (R50.3.0150.1123) http://www.4shared.com/file/239872283/472a538c/H610_WEU_ROM_R50301501123.html
Other Mio/Mitac Clones:
Clarion EZD580, it is marketed in Europe under the names Clarion Map780 and Clarion MAP680:
Clarion EZD580 (R10.4.1331.0512) http://www.4shared.com/file/237243823/beea7b5e/Clarion_EZD580_ROM_R1041331051.html
If you have a different firmware you need to back-up your wince. To do that, you need DiscRW utility.
If your device is unlocked and you can run applications on your PNA, try to use this DiskRW software:
http://www.4shared.com/file/134354901/9ef633/DiskRW.html
instructions:
1.Start DiskRW
2.Select from combo-box (close to 'Store:') -> SMFlash
3.Press '...' button and select 'Storage Card' (where to save your SMFlash.img); If '...' doesn't work you can write (using any keyboard you have) the name of the SDCard folder of your PNA (ex: \Storage Card\, \SDMMC\ ...)
4.Press 'Read' button. A Hourglass will appear and it will take approx. 30 sec.
If the above application doesn't work, you should contact me to (on this thread) to fins a solution. Because every device is different I can’t give you a DiskRW custom made for your model.
For wince 4.2: you can use also bkondisk.exe (http://hpcmonex.net/roms/bkondisk.zip). For more info check: http://www.gpspassion.com/FORUMSEN/topic.asp?TOPIC_ID=82603&whichpage=2
Question 4: I lost 'My Flash Disk' can I recover it with this procedure?
Answer 4: Yes. You have to use 'wince by USB (Format)' to format your 'My Flash Disk'.
WARNING: ALL THE INFORMATION FROM “MY FLASH DISK” WILL BE LOST (and there is nothing you can do to save it).
Question 5: There is anything else that I should know?
Answer 5: Yes. There are no warranties what so ever; so all you do is on your own risk. Anyway I can tell you that I uploaded on my GPS (C220_NA) many not compatible firmwares. I wouldn’t recommend you to do that until you really know what you are doing. If you check the firmware before and is using the same SMFlash memory area, like your device, (theoretically) there is no risk. But like I said: DON’T TRY THAT (unless you really know what you’re doing).
Those Q/A will cover most of the questions, but if you have other questions (or any advice) please let me know. When other firmware will be available I will update this post.
Custom firmware (usually ‘custom’ stands for ‘changed’ - aka ROM cooking).
software need it to change a firmware: ROMMasterCE5 (v.1.9.9) - http://www.4shared.com/file/237775472/8f86f256/ROMMasterCE_ver199.html
1. This is based on ROM R08.3 (NA) and has the explorer (taskbar) added. (doesn't work with C250!)
http://www.4shared.com/file/129470682/1fc8ff6d/C220_NA_ROM_R08_Desktop_1.html
Known bugs:
- There is a file 'desktop.ini' on every folder (from the GPS) – including Desktop.
- The menu 'send to Desktop as a shortcut' is not working.
2. This is based on ROM R08.3 (NA) and has the explorer (taskbar) and all office components added. (doesn’t work with C250!)
http://www.4shared.com/file/129470932/f760619b/C220_NA_ROM_R08_Desktop_2.html
Known bugs:
- There is a file 'desktop.ini' on every folder (from the GPS) – including Desktop.
- The menu 'send to Desktop as a shortcut' is not working.
3. This is based on ROM R08.3 (NA) and has the explorer (taskbar) and all office components added. Has a Navigator.lnk shortcut from Desktop to \My Flash Disk\MioMap\Miomap\Miomap.exe. If you have, more than one, navigation software you can place a script there - using mortscript switch command; to be able to start any of those applications. Also previous version has the FSRAMPERCENT to small -> was increased to 1.5M (doesn’t work with C250!)
http://www.4shared.com/file/129471186/a5564a94/C220_NA_ROM_R08_Desktop_3.html
Known bugs:
- There is a file 'desktop.ini' on every folder (from the GPS) – including Desktop.
- The menu 'send to Desktop as a shortcut' is not working.
- Taskbar is on top of the navigation software. FIX: Start \ Settings \ Taskbar and Start Menu -> CHECK Auto hide
A second (more complicated option) that will help you to recover MioC320 (probably also C520 and C720) is JTAG recovery:
http://www.4shared.com/file/JAIsslVX/RecoverMioCX20.html
This method can be used also for GWES error at start up or 'only orage screen' at start up ... or other type of malfunctions.
With srelioskoz help we have a recovery method also for Moov series :)
============================================================================================================
FIRST OF ALL DO NOT TRY ANYTHING IN YOUR MIO BEFORE YOU READ ALL THIS POST
IF YOU DON'T SEE YOUR FIRMWARE AVAILABLE, DON'T TRY TO USE ANOTHER FIRMWARE, FIRST DOWNLOAD THE SMFLASH.IMG (TO BE ABLE TO RESTORE YOU DEVICE, LATER ON) AND ONLY AFTER THAT YOU CAN PLAY WITH OTHER FIRMWARES.
WARNING! DON'T USE PIN9 MOTHODE UNLESS YOU TRIED EVERYTHING ELSE ... MAY END UP WITH A BRICKED DEVICE (that can be only through JTAG recovered).
@ablbd:
" ... most probably is data corruption into bootloader blocks. I would say that pin9 unlock will always produce somewhere on nand data corruption. The bad luck is when that "somewhere" happens to be in bootloader area..."
1)how to upgrade mio moov firmware
http://www.4shared.com/file/191674275/ad12bab0/cobia_420_64.html
mirror: http://www.4shared.com/file/194360726/ff50dd57/cobia_420_64.html
download this file and put it in your sd card (this is for mio moov 360 if you have another mio moov you must rename the folder)
Moov 150 - European: Cobia_300L_32, North American: Cobia_300L_32_NA, Australian: Cobia_300L_32_AU
Moov 200 - European: Cobia_300_32, North American: Cobia_300_64_NA, Australian: Cobia_300_32_AU
Moov 200u - European: Cobia_300_64, North American: Cobia_300_64_NA, Australian: Cobia_300_64_AU
Moov 210 - European: Cobia_T300_32, North American: Cobia_T300_64_NA, Australian: Cobia_T300_32_AU
Moov 300 - European: Cobia_400_64, North American: Cobia_400_64_NA, Australian: Cobia_400_64_AU
Moov 310 - European: Cobia_T400_64, North American: Cobia_T400_64_NA, Australian: Cobia_T400_64_AU
Moov 330 - European: Cobia_410_64, North American: Cobia_410_64_NA, Australian: Cobia_410_64_AU
Moov 360 - European: Cobia_420_64, North American: Cobia_420_64_NA, Australian: Cobia_420_64_AU
Moov 370 - European: Cobia_T420_64, North American: Cobia_T420_64_NA, Australian: Cobia_T420_64_AU
Moov 500 - European: Cobia_500_64, North American: Cobia_500_64_NA, Australian: Cobia_500_64_AU
Moov 500 R2 - European: Cobia500R2, North American: Cobia500R2_NA, Australian: Cobia500R2_AU
Moov 510 - European: Cobia_T500_64, North American: Cobia_T500_64_NA, Australian: Cobia_T500_64_AU
Moov 560 - European: Cobia_520_64, North American: Cobia_520_64_NA, Australian: Cobia_520_64_AU
Moov 580 - European: Cobia_T550_64, North American: Cobia_T550_64_NA, Australian: Cobia_T550_64_AU
when you start up your mio this program will start by it self and will ask you if you want USERMODE or SUPERMODE
choose USERMODE and OK to all it ask you.
then put power button to reset position and on again
your mio moov will start with blue upgrade screen.
download the firmware of your mio and put the files winceimg.cks and winceimg.bin in your sd card (use small cards 128M -> 1G)
startup your mio and you can see blue upgrade screen
touch on screen and choose
0=wince upgrade and put power button to off and then to on position
0=wince by sd/mmc (format) off and then on
mio moov will start the upgrade firmware
when it finish restart your mio without sd card and connect it to pc
open mio more desktop and write again mio map program and the map.
then put the power button to reset position and put the power button to on position
when you see the black screen with firmware of your mio ,push inside the sd card
your mio will ask you if you want USERMODE or SUPERMODE ... choose SUPERMODE and ok to all it ask you
this is the firmware for mio moov 330 europe
http://www.4shared.com/file/189985580/6b5048ed/Moov330_EU_ROM_V1000019.html
firmware of moov 360 europe
http://www.4shared.com/file/165538541/90b06686/Moov_360_ROM.html
firmware of mio 300 europe
THIS IS NOT A GOOD FIRMWARE ... DON'T TRY TO LOAD IT
http://www.gpspassion.com/upload2/Moov300_ .... winceimg.zip
2)How to repair your mio if no connection with pc
look this video to found how to make mio moov upgrade screen
http://www.youtube.com/watch?v=KKM7C_6UYkw
look this video how to open mio moov application
http://www.youtube.com/watch?v=ZLKSG3U2VYk
look this link .on 4 page you can see the pinout of cobia electronic part (memory IC)
http://downloads.qi-hardware.com/hardware/datasheets/qi_lb60/U9~K9GAG08U0M~~2GB-FINAL_NAND-NOT_ON_SOME_PROTOTYPES~~.pdf
- Old version (ITS NOT WORKING FOR COBIA_300_32)
first put the sd card in to mio
1)put the power button to RESET position
2)carefully connect the wire as you see on the picture http://www.4shared.com/file/192360271/79584b60/moov330pcbback1.html
3)put the power button to ON position
4)you will see the blue screen
5)take the wire from the connect
6)if you want the normal screen put again the power switch to RESET position
7)if you want to make a selection when you have blue screen, touch on screen and then put the power button to OFF and then ON position
8)DO NOT MAKE FORMAT SELECTION IF YOU DONT HAVE THE RIGHIT FIRMWARE
- New version (ITS WORKING FOR COBIA_300_32) - confirmed only by srelioskoz
1) first make a short between pin 12(vcc)and pin 19 (write protect). IC name should be something with K9GAG08U0M ... with 48 pins
2) then put the power button from RESET to ON for 4-5 seconds
3) then put the power to RESET
4) then make a short between pin 9 and GND and put power button to ON. GND its any metal used for shielding ...
FINALLY: then you see the blue screen.
5)if you want to make a selection when you have blue screen, touch on screen and then put the power button to OFF and then ON position
6)DO NOT MAKE FORMAT SELECTION IF YOU DONT HAVE THE RIGHT FIRMWARE
--------------------------------------------------------------------------------
download the firmware of your mio and put the files winceimg.cks and winceimg.bin in your sd card
with blue upgrade screen touch on screen and choose
0=wince upgrade and put power button to off and then to on position
0=wince by sd/mmc (format) off then on
mio moov will start the upgrade firmware
when it finish restart your mio and connect it to pc
open MioMore Desktop and write again mio map program and the map.
i d like to say thanks to g_alin for his help
STELIOS FROM GREECE
============================================================================================================
Moov firmware (some new devices don't have Recovery CD - in that case you should copy all data from \My Flash Disk folder before upgrade)
Moov150_EU (Cobia_300L_32) (ROM_V1.00.0024) http://www.4shared.com/file/257616884/78a132a4/Moov_150_Cobia_300L_32_EU_V100.html (not confirmed)
Moov200_EU N177 (ROM_V1.00.0030) http://www.4shared.com/file/219174788/96724186/Moov200_EU_ROM_V1000030.html
Moov200_EU (Greece) (Cobia_300_32) (ROM_V1.00.0019) http://www.4shared.com/file/243403980/19dc08e/Moov_200_Cobia_300_32_EEU_V100.html
Moov200_EEU (Cobia_300_32) (ROM_V1.00.0028) http://www.4shared.com/file/7x6pv62B/Moov_200_Cobia_300_32_EEU_V100.html
Moov200u_FEU (Cobia300_R07_0201 RAM64 MLC 2G) (ROM_V1.00.0018) http://www.4shared.com/file/jckimCl8/Moov_200_Cobia_300_64_FEU_V100.html
Moov200u_EEU (Cobia_300_32) (ROM_V1.00.0018) http://www.4shared.com/file/GtTfRwZJ/Moov_200_Cobia_300_32_EEU_V100.html
Moov200u_EEU_NEW_VERSION (Cobia300R2_32M_R04_0827 MLC 2G) (ROM_V1.00.0018) http://www.4shared.com/file/jcHm1PXx/Moov_200_Cobia_300_32_EEU_V100.html
Moov200_???_(Cobia_300R2_32_N206_T300.R2.32) (ROM_V1.00.0004) http://www.4shared.com/file/E-Rf8Tzw/Moov_200_Cobia_300R2_32_V10000.html
Moov200_???_(Cobia_300R2_32_N206_T300.R2.32) (ROM_V1.00.0007) http://www.4shared.com/file/8_KNafbg/Moov_200_Cobia_300R2_32__N206_.html
Moov300_AU (ROM_410R2.V1.00.0010) http://www.4shared.com/file/9OE3RaRe/Moov_300_AU_ROM_410R2V1000010.html
Moov310_NA (ROM_COBIAT400.V1.00.0015) http://www.4shared.com/file/tjOj81Yv/Moov_310_CobiaT400_NA_V1000015.html
Moov330_EU (ROM_V1.00.0019) http://www.4shared.com/file/189985580/6b5048ed/Moov330_EU_ROM_V1000019.html
Moov330_EU (ROM_V1.00.0028) http://www.4shared.com/file/195309548/19093226/Moov330_EU_ROM_V1000028.html
Moov330_EEU (ROM_V1.00.0000) http://www.4shared.com/file/241960405/70275e3/Moov_330_Cobia_410_EEU_V100000.html
Moov330_CHN_Cobia_410R2 (ROM_V1.00.0013) http://www.4shared.com/file/nR5IlW69/Moov_330_Cobia_410R2_CHN_V1000.html
Moov360_EU (ROM_V1.00.0021) http://www.4shared.com/file/194369290/8e042cc8/Moov360_EU_ROM_V1000021.html
Moov370_EU(N179) (ROM_V1.00.0019_Cobia_T420_64_V_5.50.0212) http://www.4shared.com/file/YHquQBF3/Moov370_EU_ROM_V1000019.html
Moov370_CH (ROM_v1.00.0028) http://www.4shared.com/file/tXRehyE5/Moov_370_CH_ROM_v1000028.html
Moov500R2_EU (ROM_T510R2.V1.00.0003)_Poland http://www.4shared.com/file/ZD6JpoiC/Moov500R2_EU_ROM_T510R2V100000.html
Moov500R2_EU (ROM_T510R2.V1.00.0004) http://www.4shared.com/file/WwCG4uri/Moov500R2_EU_ROM_V1000004.html
Moov500R2_EU (ROM_T510R2.V1.00.0004)_Poland http://www.4shared.com/file/kRKNRijd/Moov500R2_EU_ROM_T510R2V100000.html
Moov500R2_EU (ROM_T510R2.V1.00.0010) http://www.4shared.com/file/J-drNInK/Moov500R2_EU_ROM_V1000010.html
Moov500R2_EU (ROM_T510R2.V1.00.0010)_Poland http://www.4shared.com/file/9oNo56XM/Moov500R2_EU_ROM_T510R2V100001.html
Moov500R2_NA (ROM_500R2NA.V1.9540.0012) http://www.4shared.com/file/194616656/765533d8/Moov500R2-NA_ROM_V195400012.html
Moov560R2_EU (ROM_T550R2.V1.00.0003) http://www.4shared.com/file/YO67nmO9/Moov560R2_EU_ROM_V1000003.html
Moov S401(N245)_EU (ROM_R04.00.0657.STF128M) http://www.4shared.com/file/qSlo7dm0/Moov_S401_N245__EU_ROM_R040006.html
MoovS501_NA (ROM_SEEKER.R11.00.0657.STF128M) http://www.4shared.com/file/-QE96stQ/MoovS501_NA_ROM_SEEKERR1100065.html
MoovS505_EU (ROM_SEEKER.R16.00.0773.STF128M) http://www.4shared.com/file/237769132/9a9763b1/MoovS505_EU_ROM_SEEKERR1600077.html
MoovS505_EU (ROM_SEEKER.R12.00.0669.STF128M) http://www.4shared.com/file/c6BYyNTV/MoovS505_EU_ROM_SEEKERR1200066.html
MoovS568_EU (ROM_SEEKER.R20.00.0844.STF128M) http://www.4shared.com/file/237280467/3b4c1c8/MoovS568_EU_ROM_SEEKERR2000084.html
Moov_M300(N254)_EU_Croatia (ROM_R02.00.0766.STF64M) http://www.4shared.com/file/4yYzii76/Moov_M300_N254__EU_cr_ROM_R020.html
Moov_M300(N254)_EU_Poland (ROM_R02.00.0766.STF64M) http://www.4shared.com/file/qjhNeC-5/Moov_M300_N254__EU_pl_ROM_R020.html
Moov_M300(N254)_EU (ROM_R02.00.0766.STF64M) http://www.4shared.com/file/anef1bOv/Moov_M300_N254__EU_ROM_R020007.html
MoovM400_NA (ROM_R09.00.0896.STF64M) http://www.4shared.com/file/pIMu0bsx/Moov_M400_NA_R09000896STF64M.html
MoovM400 (ROM_R03.00.0775.STF64M) http://www.4shared.com/file/proiHqRc/Moov_M400_R03000775STF64M.html
MoovM400 Plus FEU (ROM_R09.00.0930.64M) http://www.4shared.com/file/sqtuCSj-/Moov_M400FEU_R0900093064M.html
Custom/Recovery firmwares (Those firmwares have AppStartupPri.exe replaced with fileManCE.exe):
Moov200u_FEU (Cobia300_R07_0201 RAM64 MLC 2G) (ROM_V1.00.0018) http://www.4shared.com/file/ZVxr2Paw/M200C30064_FEU_V1000018_modifi.html
Moov310_NA (ROM_COBIAT400.V1.00.0015) http://www.4shared.com/file/0CAO_rwy/M310C_T400_NA_V1000015_modifie.html
Moov500_EU (ROM_COBIAT510R2.V1.00.0010) http://www.4shared.com/file/EjbF8cxN/M500C50064_EU_V1000010_modifie.html
M series has also the appstartupsec.ini ...
Moov_M400 (ROM_R03.00.0775.STF64M) http://www.4shared.com/file/pIuuoZ7R/M_M400_R03000775STF64M_modifie.html
Not confirmed ! Should be Moov but the software ask for Navman: (use it carefull ....)
Moov_M300(N254)- Ex Yugoslavia 'Adriatic'(ROM_R00.00.1029.64M) http://www.4shared.com/file/ovARP6-J/Moov_M300_Adriatic_R0000102964.html
For the spirit (MIO Moov S568), after flashing the firmware, the software can be reinstalled with the current latest version downloadable at:
https://register.navman.com/installer/?BRANDNAME=mio&HARDWARENAME=SEEKER_FT525&SKUID=9248&DISPLAYNAME=Moov%20S568&LANGUAGE=en-US&DEVICEVERSION=6.10
For the Moov 370, after flashing the firmware, the software can be reinstalled with the current latest version downloadable at:
https://register.navman.com/installer/?BRANDNAME=mio&HARDWARENAME=SEEKER_FT525&SKUID=9248&DISPLAYNAME=Moov%20370
Other ROMS
Navman M300 (ROM_R02.00.0766.STF64M) http://www.4shared.com/file/t_aYKbvo/Navman_M300_EU_ROM_R02000766ST.html
NAVMAN S30 (ROM_S30.V1.00.0004) http://www.4shared.com/file/NlIRbiL3/Navman_S30.html
NAVMAN S50 (ROM_S50.V1.00.0016) http://www.4shared.com/file/2jP6rYIC/S50_ROM_S50v1000016.html
NAVMAN S55 (ROM_S55.V1.00.0005) http://www.4shared.com/file/P1B5zciI/S55_ROM_S55V1000005.html
NAVMAN S75 (ROM_V1.00.0002) http://www.4shared.com/file/pQXicU6v/Navman_S75_EU_ROM_V1000002.html
NAVMAN S80 (ROM_S80.v1.50.0011) http://www.4shared.com/file/z4PFwyW6/S80_ROM_S80v1500011.html
NAVMAN S90i (ROM_S90i.v1.00.0019) http://www.4shared.com/file/4iZQmoty/S90i_ROM_S90iv1000019.html
Medion P4420 (ROM_MDPNAP4420TR12) http://www.4shared.com/file/wFLatmx7/Medion_P4420_MDPNAP4420TR12.html
http://www.4shared.com/file/IAX1DEED/Medion_MDPNAE413XTR09.html
http://www.4shared.com/file/56ttb3vM/Medion_MDPNAE423XTR09.html
Navman F200T (ROM_F200T.V1.00.0000) http://www.4shared.com/file/Gz2b41ju/Navman_F200T.html
banneris reported (page 121) reported a Moov_M400 recovery (with wrong paths.xml configuration), switching RESET button ...
============================================================================================================
1. I emptied battery completely (If device is working you may turn on route simulation)
2. Connect Mio with USB cable with PC, with switch on RESET position
3. Now comes a series of fast switching ON/OFF, do it couple of times but make sure the screen is on during your switch is off, it takes about a second then turn the switch ON, then OFF, then ON ....
4. Why? Well I am not sure in this but it behaves similar as you turn your PC on and then hit the brake button.
5. How long? Well, in my case, until you reach the point when your PC recognize the device. The moment takes a second and disappears, but if you are lucky and catch the moment, your Mio screen will be frozen but you'll see the device mounted!!! Then you may fix paths.xml or whatever you did before...
btw I dont think that the bat should be empty.... nonsense I know... I hope it will work for some of you...
============================================================================================================
|
| 15 L A T E S T R E P L I E S (Newest First) |
| neriokas103 |
Posted - 17 juin 2013 : 21:58:09
Help. need navman N20 rom |
| Foxer |
Posted - 13 juin 2013 : 20:51:49
I made the cable with the buffer, as described in the "JTAG WIGGLER WITH RESET" picture, and it's just the same as before..
Can anyone please give me some advice? |
| Foxer |
Posted - 09 juin 2013 : 17:24:20
Up until now i've been using this:
http://postimg.org/image/45tdm07zb/
and then i've adapted it like this:
http://postimg.org/image/5gs1k9afr/
Both of these worked well with H-JTAG, and SJF2450 detects the processor, but is having problems with the NAND..
If i do the other schematics with the buffer, will SJF2450 work ok?? |
| ablbd |
Posted - 09 juin 2013 : 16:38:30
Any buffered solution is good. Keep in mind that VCC has to be 3,3V |
| Foxer |
Posted - 09 juin 2013 : 16:13:29
@ablbd
in that case, will this be any good for the MIO Moov 500??
http://lgsl.mastersetti.ro/gsm/GPS/Mio/c220%20firmware/SJF2440_v3/Wiggler_JTAG_nTRST.jpg
 |
| ablbd |
Posted - 09 juin 2013 : 08:46:25
LPT+resistors jtag will work on 5V logic devices(like rooters) but NOT on 3,3V logic! For this application you need a buffered interface, which translates the 5V logic from PC side into 3,3V logic at device side.
Documentation says that internal jtag interface is 5V tolerant (hopefully!!), which means it survives to 5V. I suggest to stop using this equipment as it exists the risk that 5V transition spikes could burn out the internal jtag buffers located in CPU. |
| Foxer |
Posted - 08 juin 2013 : 21:26:34
My device's internal memory chip has this written on it:
_____________
|SAMSUNG 931
| K9GAG08U0M with a sticker on top that says: 500R2/ WWE R03/ 2G 4179
| PCB0
-------------
And the CPU has this:
_____________
|SAMSUNG
|S3C2450XH-40
|0935 ARM
-------------
And here is what happenes when i use SJF2450:
C:\>sjf2450.exe /f:dummy.txt (I press ENTER)
+------------------------------------+
| SEC JTAG FLASH(SJF) v 0.1 |
| (S3C2450X & SMDK2450 B/D) |
+------------------------------------+
Usage : SJF2450 /f:<filename> /d=<delay>
S3C2450X(ID=0x07926f0f) is detected.
[SJF Main Menu]
0 : K9S1208 prog
1 : K9F1G08 prog
2 : K9GxG08 prog
3 : K9GAG08 prog
4 : 28F128J3A prog
5 : AM29LV800 Prog
6 : Memory Rd/Wr
7 : Exit
Select the function to test:2
ERROR: Nand not in list! ID=0xffff
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
C:\>sjf2450.exe /f:dummy.txt (I press ENTER)
+------------------------------------+
| SEC JTAG FLASH(SJF) v 0.1 |
| (S3C2450X & SMDK2450 B/D) |
+------------------------------------+
Usage : SJF2450 /f:<filename> /d=<delay>
S3C2450X(ID=0x07926f0f) is detected.
[SJF Main Menu]
0 : K9S1208 prog
1 : K9F1G08 prog
2 : K9GxG08 prog
3 : K9GAG08 prog
4 : 28F128J3A prog
5 : AM29LV800 Prog
6 : Memory Rd/Wr
7 : Exit
Select the function to test:3
[K9gag08 NAND Flash JTAG Programmer]
ERROR: K9GAG08 is not detected.
Detected ID=0xffff.
I really don't know what to do :( |
| Foxer |
Posted - 07 juin 2013 : 21:31:50
Hello to everyone!
I have a Mio Moov 500 that got totally bricked (BLACK SCREEN):((
After someone tried the pin9 to GND method to try to upgrade the firmware, now it doesn't even start any more. It only charges when connected via USB to a PC, but the screen doesn't power on, and it's not discovered by the PC.
I've tried pulling out it's battery, but still nothing. I've managed to connect it successfully to H-JTAG with a LPT cable and some resistors (without additional power/voltage input) that i soldered onto the board of the GPS, and it says "ARM926EJ-S 0x07926F0F" but i have no idea what to do next. I also fond SEC-JTAG-FLASH sjf2450 (thanks to ablbd) that works with Mio Moov 500... but what do i do next?
Please someone help me! |
| johnhayter |
Posted - 26 mai 2013 : 06:58:16
Maybe there is someyhing wrong with your cable/USB port? |
| apick1 |
Posted - 25 mai 2013 : 16:34:22
quote:
Originally posted by jimski
apick1
Hello, yes I have managed to reflash the unit from blue screen, the charge light comes on but still no connection. I could reload all the software from my dvd navdesk if I could get it to connect, if I copy files from a working unit via sdcard to the flash on this unit and launch navman software I get a message about the serial number being invalid or something like that.
Sounds like you've fixed it to me.
All you need to do is recover your keys.
If its Navdesk 2008 that option is under the word tools at the top.
|
| jimski |
Posted - 25 mai 2013 : 12:54:43
apick1
Hello, yes I have managed to reflash the unit from blue screen, the charge light comes on but still no connection. I could reload all the software from my dvd navdesk if I could get it to connect, if I copy files from a working unit via sdcard to the flash on this unit and launch navman software I get a message about the serial number being invalid or something like that. |
| apick1 |
Posted - 22 mai 2013 : 22:34:50
quote:
Originally posted by jimski
Problem still is lack of usb connectivity. Where do I find serial key and where to place it manually? I can run Miopocket so I have access to device.
If you have successfully upgraded using the wince.img file for your unit it will start up showing a screen for USB connectivity.
Have you managed to reflash the unit from the blue upgrade screen. |
| apick1 |
Posted - 22 mai 2013 : 22:31:41
quote:
Originally posted by jimski
Problem still is lack of usb connectivity. Where do I find serial key and where to place it manually? I can run Miopocket so I have access to device.
|
| johnhayter |
Posted - 22 mai 2013 : 21:48:20
quote:
Originally posted by jimski
Problem still is lack of usb connectivity. Where do I find serial key and where to place it manually? I can run Miopocket so I have access to device.
For some strange reason, you cannot get active-sync connection on this
unit, there is not enough .DLL files in windows, you have to live with it, if you can connect to PC and "see" the drives that is all you can get.
CD Key should be on CD, which came with the device. |
| jimski |
Posted - 21 mai 2013 : 17:05:32
Problem still is lack of usb connectivity. Where do I find serial key and where to place it manually? I can run Miopocket so I have access to device. |
|
|
| This page was generated in 1,09 seconds. |
 |
|
- 
- 
