| Versions |
  |
|
| Author |
 Topic  |
|
gyany
Romania
18 Posts |
|
|
BUGkc
Croatia
12 Posts |
 Posted - 14 mai 2012 : 00:01:24
|
@gyany
Thank you very much for helping me, but this is K9G4G08, not K9GAG08 :) I tried already that file (or similar) :)
Anyway, just today I have found S3C2450+K9GAG08 files for h-jtag (h-flasher)and reading from flash was ok (I read certain blocks from flash, modified it…), but writing (program) didn't work. Then I tried S3C2443+K9GAG08 (although I have S3C2450) and it worked.
(sorry on my bad english)
|
Edited by - BUGkc on 14 mai 2012 00:02:03 |
 |
|
|
LEENO
6 Posts |
Posted - 17 mai 2012 : 13:37:32
|
Hello,
i have mio moov 200 model n206,
it freeze at startup at mio logo,
i downloaded cobia files, renamed folder to Cobia_300_32 but not go in flashmode, still freeze at mio logo
Please helpme
Thanks in advance
BR |
|
|
|
BUGkc
Croatia
12 Posts |
Posted - 17 mai 2012 : 15:39:56
|
@LEENO
You can do JTAG procedure to solve this problem. In my experience none of this method with sd card doesn’t work when problem is "startup orange screen".
With JTAG you will enable blue upgrade screen. After that you will be able to install new WindowsCE...
I did JTAG only on mio c720 and moov m300, so you must read this thread, there is probably someone who had that problem and make JTAG.
You can also try to connect pin 9 to ground instead of making JTAG, to enable blue upgrade screen:
http://www.youtube.com/watch?v=KKM7C_6UYkw |
Edited by - BUGkc on 17 mai 2012 15:40:48 |
|
|
|
buuquoc85
3 Posts |
Posted - 19 mai 2012 : 04:02:00
|
| Can anyone send me a link to download Moov 300 EU firmware please? i searched on the internet and our forum all day but there's no result. Thanks alot |
|
|
|
LEENO
6 Posts |
Posted - 19 mai 2012 : 08:14:03
|
@BUGkc
thank you friend,
Please can you give me files for flash mio moov 200 in blue screen?
Best regards
Leeno |
|
|
|
BUGkc
Croatia
12 Posts |
Posted - 19 mai 2012 : 09:04:39
|
| You mean wince rom? You have this in first post of this thread.There is more version of rom for Moov200, depending on which model you have I think. |
|
|
|
mike85
4 Posts |
Posted - 19 mai 2012 : 19:51:07
|
@BUGkc could you please post some instruction and files for Mio Moov EEU JTAG
cobia 400.v1.00.0018
I have a mio moov 300 with orange screen. I tried pin9 method, but unfortunately the screen doesn't open when i touch the pin9 and i put the gps button to ON.
Thank you in advance! |
Edited by - mike85 on 19 mai 2012 20:20:50 |
|
|
|
buuquoc85
3 Posts |
Posted - 20 mai 2012 : 04:51:13
|
| my model is Mio moov 300 EU (Cobia_400_64), there's no fw for this model in this theard or link die. could anyone send me the link to download firmware for mio Moov 300 EU please? Thanks in advanced |
|
|
|
BUGkc
Croatia
12 Posts |
Posted - 20 mai 2012 : 20:53:54
|
@mike85
I would like to help you but I only did jtag on c720 and moov m300. So, if you want to do jtag, you must read this thread. There is for sure someone who had problem with same model you have. But, I can tell you some instruction to start. You can download https://rapidshare.com/files/2747556340/RecoverMioCX20.zip. There is PDF tutorial for c720, but it contains jtag schema that is the same like in moov series (I know for sure for M300). Only pins on motherboard are in different place, but you can adapt (like I did). Second, for sure you will need H-Jtag: http://www.hjtag.com/en/view.asp?typeid=2&id=20. It contains also H-flasher that you may also need (Like I did for M300). In my case of M300, I needed drivers for my processor and nand flash drive to use h-flaser. Then I read block16 from nand flash, modify this section with hex editor (change lockedut to unlocked) and write it back to same address at memory.
I don't know how it is on your model exactly. You must explore it.
For ROM of model moov 300 there is no valid link. Maybe someone has it, so he can upload it.
(sorry on my bad english)
|
|
|
|
mike85
4 Posts |
Posted - 20 mai 2012 : 22:55:22
|
@BUGkc thank you for your time, but it sounds very complicated and i also don't have required files for mio moov 300 JTAG :(
@buuquoc85 I found this firmware on internet for mio moov 300 EU, see if it works for you:
https://rapidshare.com/files/678391172/MOOV300_winceimg.zip |
Edited by - mike85 on 20 mai 2012 22:56:39 |
|
|
|
ablbd
342 Posts |
Posted - 20 mai 2012 : 22:58:37
|
| buuquoc85: Once I used for a moov 300 the bootloaders and FW from Moov 330. Later on I studied the issue: the conclusion was that Moov 300, 310 and 330 have identical HW, so bootloaders and FW can be replaced at will. |
|
|
|
buuquoc85
3 Posts |
Posted - 21 mai 2012 : 04:15:03
|
| solved |
Edited by - buuquoc85 on 21 mai 2012 11:20:25 |
|
|
|
mike85
4 Posts |
Posted - 21 mai 2012 : 13:46:25
|
| @buuquoc85 how? |
|
|
|
cecen
5 Posts |
Posted - 28 mai 2012 : 10:38:13
|
Hi Everyone!
I have completely dead MIO MOOV M300. Presumably bootoader is dead because I accidentaly erased (formatted) flash. After power on i see ony black screen. I tried all possible solution by JTAG but without success.User NAVI-GPS give solution on page 99 forum
http://www.gpspassion.com/forumsen/pop_profile.asp?mode=display&id=532791
Do somebody have other ideas what to do?
NAVI_GPS could you give me your e-mail?
|
|
|
|
Topic |
|
|
|
| This page was generated in 0,67 seconds. |
 |
|
- 
- 
How to upgrade/downgrade the firm. on Mio (Moov+C)
