| Versions |
  |
|
| Author |
 Topic  |
|
|
PurpleB
Israel
2 Posts |
 Posted - 31 août 2012 : 07:25:36
|
[I've put this question also in PDA and PC support, sorry if this is the wrong forum]
First of all I'd like to thank everyone in these forums and community. Been reading around a lot before deciding to go ahead and install MioPocket 4.0 on my Mio Moov S501. And it works perfectly... except
[This is, of course, a newbie question]
When I start MioMap from PDA it shows satellite and everything is fine. When I start it from MioPocket, all satellites are 0
What am I missing? Configuration file? Some sort of "enable GPS" setup?
[this also goes for any other navigation application]
Also, when starting with SD card, I get a quick "flash" screen and have time to click starting from MioPocket, but couldn't get to any menu/application where I can set the delay time.
Any response will be appreciated |
|
|
Ads
|
|
|
jwoegerbauer
1821 Posts |
Posted - 02 sept. 2012 : 17:33:24
|
@PurpleB,
IMHO first step should always be a Google-search, in your case you'ld search for "MioPocket no GPS", because almost always you are not the 1st one who have this issue. 
quote:
When I start MioMap from PDA it shows satellite and everything is fine. When I start it from MioPocket, all satellites are 0
What am I missing? Configuration file? Some sort of "enable GPS" setup?
You are right, initialzing the GPS-chip is suppressed by MioPocket, this because of the default boot sequence of your S501 was altered by MioPocket, i.e. OEM's default startup logic (which includes initializing the GPS-chip) is gone.
Don't know whether this really will help you:
http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=139604#982381
|
 |
|
| |
Topic |
|
|
|
| This page was generated in 0,44 seconds. |
 |
|
- 
- 
Mio Moov s501 + MioPocket 4.0 - no GPS
